Stepper motors are designed to move in specific increments; these increments are called "steps". For example, a common standard is for 200 steps per full revolution. Microstepping is a method to send signals to the motor to move only a fraction of a full step at a time. For example, if a motor has 200 steps per revolution and is microstepped 1/16, then effectively there are 3200 small step movements (microsteps) per revolution instead of 200 larger ones. This makes the motion of the motor much smoother and more precisely controllable, at the cost of decreased holding torque.

Here are is a good references for stepper motor theory: http://users.ece.utexas.edu/~valvano/Datasheets/StepperMicrostep.pdf

And Wikipedia has a good overview as well:
https://en.wikipedia.org/wiki/Stepper_motor

Click the link to add information to this solution:
I am looking at 2 of your motor drivers. 1 is the 1/64 step and the other is 1/256. What is the difference between the two?

The frame size difference of the NEMA 23 and 24 is very slight and, depending on the motor mount both will most likely fit. The bigger difference between these stepping motors is the torque. Make sure that the motor that you purchase has the appropriate torque for the axis that it will move.

Is is safe to go with the higher torque? Or if the torque is too high for what i need is that bad?

You can use a motor with higher torque. Just make sure to select the correct driver for that motor.

Additional Information:
The frame size has nothing to do with torque. Nema 23 means a 2.3" frame. Nema 24 means a 2.4" frame. That's all. Either could have more or less torque depending on speed and power.

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
What is the difference between a NEMA 23 and NEMA 24 motor? can I use either one on a machine?

The frame size difference of the NEMA 23 and 24 is very slight and, depending on the motor mount both will most likely fit. The bigger difference between these stepping motors is the torque. Make sure that the motor that you purchase has the appropriate torque for the axis that it will move.

Is is safe to go with the higher torque? Or if the torque is too high for what i need is that bad?

You can use a motor with higher torque. Just make sure to select the correct driver for that motor.

Additional Information:
The frame size has nothing to do with torque. Nema 23 means a 2.3" frame. Nema 24 means a 2.4" frame. That's all. Either could have more or less torque depending on speed and power.

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
What is the difference between a NEMA 23 and NEMA 24 motor? can I use either one on a machine?

The parallel (printer cable) port is uses the computer as its main source of pulse trains to operate the motor driver directly. Parallel ports are a direct connection from the processor commonly referred to as GPIO pins (General Purpose I/O pins) and provides a convenient and powerful way to interface with the computer. The parallel breakout board is included in those kits only to condition those signals for use with the drivers.

The USB serves at the actual controller, sending the pulse trains, but the computer sends simple human readable instructions to the USB controller to tell the controller how to send pulses.

The non-technical differences that may serve as the most important information to you is that the parallel configurations allow for a wider variety of industry standard software that can be used to control the cnc machine. The USB that we offer requires the operator to use a software called Planet-CNC software which is a very well made and feature full cnc control software.

Additional Information:


Additional Information:


Additional Information:
USB Motion controller breakout board work with planet cnc software?

Click the link to add information to this solution:
what is the difference between parallel and USB electronics. I have a laptop that will run the mach3 program.

The Honeywell brand goggles meet ANSI certification Z136.1, relating to the safe use of lasers, and are calibrated to optimally block the specific wavelengths of light produced by CO2 lasers (the details are available in the website description here: https://buildyourcnc.com/item/laser-components-goggles-safety-honeywell.) The generic tinted goggles also block the specific CO2 laser wavelengths, but a good deal of other wavelengths as well. That and frame style variation is the basic difference.

Click the link to add information to this solution:
I was wondering what was the difference between the two pair of goggles you are selling for the blacktooth. The tinted laser goggles and the Honeywell laser CO2 goggles

The Honeywell brand goggles meet ANSI certification Z136.1, relating to the safe use of lasers, and are calibrated to optimally block the specific wavelengths of light produced by CO2 lasers (the details are available in the website description here: https://buildyourcnc.com/item/laser-components-goggles-safety-honeywell.) The generic tinted goggles also block the specific CO2 laser wavelengths, but a good deal of other wavelengths as well. That and frame style variation is the basic difference.

Click the link to add information to this solution:
What is the difference between the tinted laser goggles and the Honeywell laser CO2 goggles

The parallel (printer cable) port is uses the computer as its main source of pulse trains to operate the motor driver directly. Parallel ports are a direct connection from the processor commonly referred to as GPIO pins (General Purpose I/O pins) and provides a convenient and powerful way to interface with the computer. The parallel breakout board is included in those kits only to condition those signals for use with the drivers.

The USB serves at the actual controller, sending the pulse trains, but the computer sends simple human readable instructions to the USB controller to tell the controller how to send pulses.

The non-technical differences that may serve as the most important information to you is that the parallel configurations allow for a wider variety of industry standard software that can be used to control the cnc machine. The USB that we offer requires the operator to use a software called Planet-CNC software which is a very well made and feature full cnc control software.

Additional Information:


Additional Information:


Additional Information:
USB Motion controller breakout board work with planet cnc software?

Click the link to add information to this solution:
WHAT IS THE DIFFERENCE BETWEEN PARALLEL AND USB ELECTRONICS COMBOS MOTOR KITS

The parallel (printer cable) port is uses the computer as its main source of pulse trains to operate the motor driver directly. Parallel ports are a direct connection from the processor commonly referred to as GPIO pins (General Purpose I/O pins) and provides a convenient and powerful way to interface with the computer. The parallel breakout board is included in those kits only to condition those signals for use with the drivers.

The USB serves at the actual controller, sending the pulse trains, but the computer sends simple human readable instructions to the USB controller to tell the controller how to send pulses.

The non-technical differences that may serve as the most important information to you is that the parallel configurations allow for a wider variety of industry standard software that can be used to control the cnc machine. The USB that we offer requires the operator to use a software called Planet-CNC software which is a very well made and feature full cnc control software.

Additional Information:


Additional Information:


Additional Information:
USB Motion controller breakout board work with planet cnc software?

Click the link to add information to this solution:
WHAT IS THE DIFFERENCE BETWEEN A PRINTER CABLE PORT AND USB MOTOR KITS

The first number is the amount of chromium that is contained in the stainless, i.e., 18 is 18% chromium. The second number is the amount of nickel, i.e., 8 stands for 8% nickel. So 18/8 means that this stainless steel contains 18% chromium and 8% nickel. 18/10 is 18% chromium and 10% nickel. The higher the numbers the more corrosion resistant the material. 18/0 is a misleading designation. Both 18/8 and 18/10 contain nickel and are part of the grade family "300 series" stainless. 18/0 means that there is 18% chromium but zero nickel. When there is no nickel the stainless grade family is the "400 series". 400 series are not as corrosion resistant as the 300 series and are magnetic, where the 300 series are non-magnetic.

Click the link to add information to this solution:
What is the difference between 18/8 and 18/10 stainless steel?

We can supply all of the laser components, but you will need to determine how to mount the components.

Additional Information:
Alternatively, you can purchase our greenBull machine that has the laser/spindle combo head. You can see the laser/spindle head here: https://www.buildyourcnc.com/item/cnc-machine-laser-spindle-combo-head

Click the link to add information to this solution:
Can you supply a "KIT" to convert my 4060Z CNC to a Laser Cutter? What is the difference capabilities between the 40Watt and 80Watt?

We can supply all of the laser components, but you will need to determine how to mount the components.

Additional Information:
Alternatively, you can purchase our greenBull machine that has the laser/spindle combo head. You can see the laser/spindle head here: https://www.buildyourcnc.com/item/cnc-machine-laser-spindle-combo-head

Click the link to add information to this solution:
Can you supply a "KIT" to convert my 4060Z CNC to a Laser Cutter? What is the difference capabilities between the 40Watt and 80Watt?

Standard Version Features Mach3 Mach4 Hobby Mach4 Industrial
Number of Planners 1 1 1
Number of Axis 6 6 6
Out of Band Axis (OBA) 0 1 6
Slave axis (uses up coordinated axes) 3 N/A N/A
Slave motors (does not use up coordinated axes) N/A 4 per Axis 4 per Axis
API Interface - Open to All Hardware Yes Yes Yes
Extended Plugin Support Yes Yes Yes
User customizable GUI Yes Yes Yes
Unified (GUI) Interface - PLC, CNC, etc.. Yes Yes
Unlimited IO Yes Yes Yes
Modbus PLC Yes Yes Yes
PMC (Ladder Logic addressing for cnc/plc) Yes Yes
Unlimited File Size Yes Yes
Tool Path Display Yes Yes Yes
Tool Path Speed & Quality Low High High
Scripting - Customization Yes Yes Yes
LUA Scripting - simple, fast, cross-platform Yes Yes
- Lua sockets (ftp, http, smtp,..) Yes Yes
- SSL (security layer) Yes Yes
- LFS (manage large files and data storage) Yes Yes
- Seriel port Yes Yes
- Enraving of part numbers / serial numbering of parts Yes Yes
- Plugin panel objects Yes Yes
IPC Library for Data Sharing/tracking (Interprocess communication) Yes Yes
Full Feature Screens/Controls Per Machine Type Yes Yes
Currently Availabe: Mill, Router, Lathe, 3d Printer Yes Yes
Multiple gcode Interpruters (Per Machine Type) Yes Yes
Probing - Intergrated in standard screens Yes Yes
Simulated 3d Machining (with additional plugin license) Yes Yes
Tool Life Management (G10 L3 command) Yes
Screw Mapping Yes
Professional Screen Designer (advanced G.U.I.) Yes
- Screen Animation Control Yes
- Screen Integrated Tool Table Control Yes
- Screen Integrated Work Offset Control Yes
- Screen Integrated gcode editor Yes
- Screen Artsoft Wizard Package Integration Yes
Macro B gcode Programming (#variables) Yes
- User definable gcodes via marco calls Yes
- Macro Calls: G65, G66, G66.1 Yes
- gcode via marco call (custom G codes via macro B) Yes
- mcode via macro call (custom M codes via macro B) Yes
- mcode via sub code (custom M code via sup program) Yes
- Conditional gcodes Yes
- set VN call - define variable names Yes
gcode Editor Included Yes
Scripted M code (custom M code via LUA script) Yes Yes
Variable Speed Spindle Yes Yes Yes
Spindle Relay Yes Yes Yes
Coolant relay Yes Yes Yes
Mist Relay Yes Yes Yes
Threading Yes Yes Yes
Rigid Tapping Yes Yes Yes
Single Block Yes Yes Yes
Block Delete Yes Yes Yes
Optional Stop Yes Yes Yes
MACH CNC CONTROL SOFTWARE MAIN FEATURES AND VERSION DIFFERENCES
Standard Version Features Mach3 Mach4 Hobby Mach4 Industrial
MACH CNC CONTROL SOFTWARE MAIN FEATURES AND VERSION DIFFERENCES
Cutter Comp Yes Yes Yes
Fanuc Type C Cutter Comp Yes Yes
Fixture Offsets Yes Yes Yes
G51 Scaling Yes Yes Yes
G92 Offsets Yes Yes Yes
G52 Offsets Yes Yes Yes
Event Driven Yes Yes
Multi Line MDI Yes Yes
Subs In MDI Yes Yes
OpenGL Optimization Yes Yes
Multi-platform OS Compatibility Option Yes Yes
Online Support Yes Yes Yes
Phone Support Option Available Yes
Support Priority Yes
Available to End Users as "Do-it-yourself" Yes Yes
Summary - Mach3 versus Mach4 :
Mach4 Hobby is the closest comparable version to Mach3, yet it is still much more advanced. The price point of these versions is nearly
identical. Mach3 is very popular for hobby enthusiest and is used in highly modified form by some great OEM's. In general, Mach4 is more
complex than Mach3 and follows cnc industry standards. Mach3 has many customizations to make it easier for hobby users, but can lead to
difficulties if users plan to apply their knowledge to more advanced systems. Mach4 is built as a full featured cnc controller capable of high
speed machining for servo and stepper systems. Mach3's feature set is complete, while Mach4's will continue to expand. If you are new to cnc,
Artsoft highly recommends using and learning Mach4 even if it appears that Mach3's feature set will be adequate for your needs.

Click the link to add information to this solution:
WHAT IS THE DIFFERENCE BETWEEN MACH3 AND MACH4?

The kits on eBay are generally older versions of the machine kits that came with less options.

Click the link to add information to this solution:
I notice your kits cost about 25% more than the same kit on ebay, is there a difference in quality or some other feature of your kits?

I will address the two separately (precision and accuracy):

Precision (repeatability):
This is most closely related to the resolution. The blackTooth uses the same mechanical drive (timing belts and pulley) of the same ratios and specifications, so the two machines will be the same in this respect.

Accuracy:

The output of the machine (the final physical work) matching the input given to the machine (the design data or instructions for the machine to product the physical work. This has to do with both resolution and how well the machine will hold up over time and through environmental changes.

With that said, both machines have very similar attributes in mechanics and structure. The overall structure is made of MDO (Medium Density Overlay) and has a very low coefficient of linear expansion with regards to temperature change, so accuracy will not be affected in any appreciable manner over time with the two machines. The Vertical Laser XL does use more industry standard rails to hold the heavy gantry, but this will be differ appreciably since the blackTooth will exhibit rigidity by virtue of its size.

It really is best to consider the application and size as the main aspects of deciding between these two machines.

Hope this helps.


Additional Information:
We're looking at getting the vertical so we can run both large and small jobs on the same machine. It sounds like running a small job on the vertical (using a positioning jig) would provide results at least as
good as running the same job on the blacktooth. Does this sound about right?

Click the link to add information to this solution:
Is there any precision or accuracy difference between the vertical and blacktooth lasers?

3 axis machines cannot create undercuts in the part.

These videos show the capabilities of 3 and 5 axis machining:

3-axis CNC:

Click the link to add information to this solution:
WHAT THE DIFFERENCE BETWEEN 3 AXIS AND 5 CNC?

Surely you know the brand motors you sold me?

Click the link to add information to this solution:
I bought your 3 axis combo and need to know what name brand is the motors and their ounces and the drivers

The power supply units that come with our Electronics Combo Kits have a switchable input voltage. There is a red switch on the side that allows you to switch from 220v to 110v.

Click the link to add information to this solution:
hi am over in the uk and was looking to buy one of your stepper motor bundels but our power is 240v instead of 110v do u sell other power supply units to suit our voltage thanks.

The first number is the amount of chromium that is contained in the stainless, i.e., 18 is 18% chromium. The second number is the amount of nickel, i.e., 8 stands for 8% nickel. So 18/8 means that this stainless steel contains 18% chromium and 8% nickel. 18/10 is 18% chromium and 10% nickel. The higher the numbers the more corrosion resistant the material. 18/0 is a misleading designation. Both 18/8 and 18/10 contain nickel and are part of the grade family "300 series" stainless. 18/0 means that there is 18% chromium but zero nickel. When there is no nickel the stainless grade family is the "400 series". 400 series are not as corrosion resistant as the 300 series and are magnetic, where the 300 series are non-magnetic.

Click the link to add information to this solution:
WHAT IS THE DIFFERENCE BETWEEN ROCK CRYSTAL ?

If you read the description the first uses a parallel interface for computer hookup. The second uses USB interface for computer hookup. The third utilizes an integrated computer which is built into the package thus you do not need an external computer.

Click the link to add information to this solution:
What is the difference between the 3 Blacktooth laser packages offered? Specifically, one with/without a computer? Why do I need one? Also, is the $2100 assembled vs the $1700 which is not? What am I paying $400 more for?