[ Log In ]
[ Register ]
Database maintenance (5/13/2022 and 5/14/2022 between 9:00 pm to 3:00 am EDT). You may experience reduced performance during this time.
Price Options Your Cart
Porter Cable 690 / 7500 Series Spanner Wrench
$15.95
Bosch (1617/1618/1619) Spanner Wrench
$15.95
Bosch (PR20EVSK) Spanner Wrench
$15.95
Introduction:

This is the tool used to tighten the nut onto the router. The spanner wrench fits into the grooves shown at the front of the collet nut.

Description:

Dimensions: 6 1/4" X 1/8"
Jaw opening 1 1/2" wide
Non-slip red rubber grip

Ask a question about the Spanner Wrench for Router Collet Nut:
Previously answered questions:

Click on the question to reveal the answer.
No previous questions. Be the first to ask a question about this product.
Related Tutorials
Step 30: Router Mount Part 1
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The first of the videos for the router mount is finally edited and ready to post. The z-axis bearing supports were made in the current shape to be able to hold the router with a piece of stock in-between containing a hole for the router. This hole will need the ability to tighten against the router for stability and leveling. For my machine, I'm making one mount. This router mount will be positioned around the upper part of the router housing. Later, I will be installing a vacuum connection which will also serve as increased support for the router.
DIY tramming a cnc router Tramming the Router or Spindle (Making Sure it's Perpendicular to the Table)
Tramming the head (spindle or router) of a CNC router can be done with a simple old machinist trick using a long bar bent in a special way so that you can very accurately ensure the router or spindle is perpendicular to the bed (table) of the CNC machine.
Step 33: Router Mount Part 4
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. This is the final step for the first phase of the router mount. I say first phase, because I will build a vacuum attachment that will also serve as an additional router mount. You will see the method at which I mount the router in this video. Instead of routing out a perfect circle, and we all know how good I am at routing out circles, and squeezing the circle around the router housing, the router mount will come in two parts and act like a vice. I did not want to put any undue stress on the wood by using the squeeze method, but it woks fine. I used it on my last machine and I had no problems and I even used only 1/2" thick MDF for the mount.
Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.