[ Log In ]
[ Register ]
Database maintenance (5/13/2022 and 5/14/2022 between 9:00 pm to 3:00 am EDT). You may experience reduced performance during this time.
foam cutting end mill by onsrud 2-1/4 Foam cutting end mill by onsrud cut diameter 1/4 Foam cutting end mill by onsrud. 52-264
foam cutting end mill by onsrud 2-1/4 Foam cutting end mill by onsrud cut diameter 1/4 Foam cutting end mill by onsrud. 52-264
Price Options Your Cart
Onsrud Upcut Foam End Mill Cut Diameter: 1/4" Cut Length 2-1/4" Shank 1/4"
49.95
Introduction:

Onsrud Foam cutting end mill. 1/4" Solid Carbide Two Flute UpCut. Shank: 1/4", Cut Diameter: 1/4" Cut Length: 2-1/4"

Description:

This end mill is designed to cut foam material. The overall length including the shank is 4". The cut diameter and shank is 1/4" so you will need a 1/4" collet to accept this end mill. The helix angle of the cutting flutes is 25 degrees. The number of flutes is two (2). The cutting end of the end mill is flat with a zero cutting radius so the bottom of the cut will be flat if it is not cutting all the way through the foam material.

Ask a question about the Onsrud 2 Flute 1/4" Cut Diameter Upcut Foam Cutting End Mill:
Previously answered questions:

Click on the question to reveal the answer.
No previous questions. Be the first to ask a question about this product.
Related Tutorials
Technique to Minimize Backlash by Gérard C.
Getting rid of backlash seems to be the biggest concern for the CNC hobbyist, especially when milling PCBs since copper traces for surface mount devices are used. Surface mount devices are very small electronic parts that contain leads that are extremely close together, or the leads are found on the bottom of the component and the part usually lays flat on the PCB (Printed Circuit Board).
blacktoe build from Katy Makerspace - all parts laid out on a table. Katy Makerspace blackToe Build Part 1
We're proud to be affiliated with the Katy Makerspace. We recently provided them with a blackToe for their members to use. In this first part we'll be examining how they went about organizing parts for the initial build, as well as constructing the table.
greenBull cutting aluminum graphic poster Cutting Aluminum with the greenBull CNC and Onsrud End Mill
In this video, we are showing 2 examples of cutting aluminum. The first example will be dry cutting which is cutting in the absence of a coolant or cutting fluid.
Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.