[ Log In ]
[ Register ]
NEW: CNC Router PLANS Available for all of our Newest CNC Models!! Click here to "Design Your CNC".
Serial to USB converter with Micro USB cable Micro USB Cable included with board Back view of USB to Serial Converter Alternate view of USB to Serial board USB to serial converter shown with caliper. The measurement reads 1.0665 inches. USB to serial converter shown with caliper. The measurement reads .6695 inches.
Serial to USB converter with Micro USB cable Micro USB Cable included with board Back view of USB to Serial Converter Alternate view of USB to Serial board USB to serial converter shown with caliper. The measurement reads 1.0665 inches.  USB to serial converter shown with caliper. The measurement reads .6695 inches.
Price Options Your Cart
USB to Serial Converter
$10.95
Introduction:

FTDI TTL-232R USB to UART (Serial) Converter cable allows you to communicate through USB if you don't have a serial port.

Description:

This device will provide a Tx (Transmit) and Rx (Receive) functionality and 5 volt power from the computer through the USB. We have replaced the old version of this product to a newer, easier-to-use board that doesn't require soldering. Simply plug the micro USB cable into the board and the USB cable into your computer.

Related Tutorials
Step 21: Driver Caps, Resistor Networks and Mosfets
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The resistors are in, right? Ah, I know, you want to see the complete assembly before you dig in. Ok, on to this part of the assembly. Please don't ask me what Mosfets are, but the word sound cool! I can tell you that they stand for Metal Oxide Semiconductor Field Effect Transistor. I have personally read about fifty descriptions of this electronic animal and I still can't figure it out. It doesn't say much for a Berkeley grad! Well, I'm open to some plain English interpretations without the word "drain" in them. Are you still with me?
Step 20: Stepper Driver Part 1 - Resistors
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. Well... here we are, finally getting started with the electronics portion of the video series. The entire structure of the CNC machine is complete with the exception of the router mount. We will get to that a little later. For now, we will start on the assembly of the HobbyCNC 3 axis chopper unipolar stepper driver.
40 Watt CO2 Laser Bulb with yellow sticker. How to Test a CO2 Laser Tube for Power
In this tutorial we'll explain the process for properly testing a CO2 laser tube for power. In this example we are testing a 40W CO2 laser tube and 40W power supply.