In the event that your CNC Machine goes rogue and seems hell-bent on self-destruction, consider this lifesaver: an all-metal emergency stop button. It's equipped with three leads, compatible with both NC (Normally Closed) and NO (Normally Open) configurations. To halt the chaos, just give it a push; a twist will set things back in motion.

These goggles are made to help protect your eyes from the wavelength(s) of the laser. Please always make sure you are wearing protective eyewear when running our blackTooth. The manufacturer of these goggles is Honeywell. The appearance of these goggles may differ from the image of frame color. Specs for the CO2 Goggles are as follows: OD> 9 @ 190-360NM, OD> 5 @ 9.000-11, 100NM OD > 7 @ 10, 600NM, 9000-1000 DILB 3 GPT S CE

These safety goggles are made to help protect your eyes from the 10500nm or 10.5um wavelength(s) of the laser.

If your CNC Machine starts to run wild, or decides to destroy itself, this button could save your machine, and your nerves! This button is capable of NC (Normally Closed - red side) and NO (Normally Open - green side) operation (notice the red and green on the bottom of the button). Push the button in to engage, and twist to release.

Limit switches serve as the mechanism that tells the computer the limits of the CNC machine. When one of the axes moves to an axis limit, the switch is activated and the machine stops. These limit switches are also use to inform the computer of the home position.

If your CNC Machine starts to run wild, or decides to destroy itself, this button could save your machine, and your nerves! This button is capable of NC (Normally Closed - red side) and NO (Normally Open - green side) operation (notice the red and green on the bottom of the button). Push the button in to engage, and twist to release.