[ Log In ]
[ Register ]

Question #: 14263

Question: Can Mach4 run under Windows 10?

Current Solution

Yes, Mach4 will work with windows 10.

Additional Information:
Can I use a dB 25 BB mach4 and widows 10 if not what’s the best solution

Respond:

Other Possible Solutions to this Question

  • output will not work in windows 10

    For both of the controllers that I recommend, the pokeys57CNC and the Mach3 USB controllers, will both work fine in windows 10. If you are using the Mach3 USB controller, confirm that the output in the ports and pins configuration is using port 3.

    Click the link to add information to this solution:
    output will not work in windows 10

  • will any of your software work with Windows 10

    Yes, all of the software we sell on this website will work on windows 10.

    Additional Information:
    I have a usb controller with JP-3163B 3.9 V is it able to work with mach 4 and windows 10

    Click the link to add information to this solution:
    will any of your software work with Windows 10

  • Help with loading mach3 usb interface board on Windows 10

    The Mach3 usb controller/interface has instructions and videos on this page:
    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

    There is a 5 step process on that page to install the plug-in and the configuration xml file that is necessary for the proper functioning of the controller.

    The videos on that page also demonstrate in detail how to install the software, plug-ins, xml file and wiring and testing most of the features of the Mach3 USB interface.

    Hope this helps.

    Click the link to add information to this solution:
    Help with loading mach3 usb interface board on Windows 10

  • Help with loading mach3 usb interface board on Windows 10

    The Mach3 usb controller/interface has instructions and videos on this page:
    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

    There is a 5 step process on that page to install the plug-in and the configuration xml file that is necessary for the proper functioning of the controller.

    The videos on that page also demonstrate in detail how to install the software, plug-ins, xml file and wiring and testing most of the features of the Mach3 USB interface.

    Hope this helps.

    Click the link to add information to this solution:
    Help with loading mach3 usb interface board on Windows 10

  • Help with loading mach3 usb interface board on Windows 10

    The Mach3 usb controller/interface has instructions and videos on this page:
    https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

    There is a 5 step process on that page to install the plug-in and the configuration xml file that is necessary for the proper functioning of the controller.

    The videos on that page also demonstrate in detail how to install the software, plug-ins, xml file and wiring and testing most of the features of the Mach3 USB interface.

    Hope this helps.

    Click the link to add information to this solution:
    Help with loading mach3 usb interface board on Windows 10

  • Does Corel Draw support LaserCAD V8.10.21 as a plug-in using Windows 10?

    Yes, LaserCAD V8.10.21 supports the use of CorelDraw and the CorelDraw direct output. In Chapter 2 of the manual (link below) that focuses on the installation of LaserCAD. At the first part of the installation, you will be given a set of options including the LaserCAD installation and the installation of plugins for AutoCAD, Adobe Illustrator and CorelDraw. Remember that the CorelDraw plugin must be installed in the director of the CorelDraw software.

    In chapter 5, the manual will instruct you how to install the Manual Download Tool "AWCLaserCut" within the CorelDraw sofware using the Macros feature of CorelDraw.

    I hope this helps. Thanks!!


    http://www.sztrocen.com/uploads/soft/20190103/LaserCAD%20User%20Manual.pdf

    Click the link to add information to this solution:
    Does Corel Draw support LaserCAD V8.10.21 as a plug-in using Windows 10?

  • Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

    Yes, Mach3 (the software profram) will work with Windows 7, and windows 10 when coupled with the Mach3 USB interface. If you intend to use the parallel port driver, stick with Windows 7 in 32-bit mode.

    Additional Information:
    Rnrmotion.dll is a dynamic link library which is very similar in function to an executable program, or app. Since a dll is executable, malicious code can be embedded in that type of file, so windows will automatically flag all files of this type. You just need to make sure you are downloading from a trusted source. The emotion.dll file on our site is clean, but still run run windows defender against it to make sure.

    Click the link to add information to this solution:
    Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

  • Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

    Rnrmotion.dll is a dynamic link library that is very similar in function to an executable program, or app. Since a dll is executable, malicious code can be embedded in that type of file, so windows will automatically flag all files of this type. You just need to make sure you are downloading from a trusted source. The emotion.dll file on our site is clean, but still, run windows defender against it to make sure.

    Click the link to add information to this solution:
    Why does Windows 10 block the RnRmotion.dill for Mach3 USB interface from being downloaded?

  • CAN I USE AN APPLE COMPUTER TO RUN THE CNC?

    There are several CAD/CAM programs out there for MacOS. Here is a list of a few: http://www.macuser.de/forum/f53/3d-2d-cad-395058/#post4499316
    I've also read good things about punchCAD: http://www.punchcad.com/
    Of course, there is always SketchUp if you are in a pinch. There are a few CAM plugins for SketchUp as well, but I've never used them, so I can't vouch for them.

    CAD/CAM will get you as far as designing your parts and producing the g-code, but if you also want to run the CNC machine with your Mac, you will need a piece of software similar to Mach3 or EMC to run the g-code. I haven't been able to find anything like these programs that runs on Mac, so you may have to run Mach3 or EMC in Windows using Boot Camp or a virtual machine such as VMware or Parallels.

    Personally, I would use the Mac to do all the CAD/CAM, then use a cheap PC to run the CNC machine.

    Additional Information:


    Additional Information:
    EasyDNC for OSX
    www.dnc-x.com

    Additional Information:


    Additional Information:
    Hi guys I’m new to the cnc and I’m beginning to learn how to operate and cad-cam software also my cnc runs on Mach3 my questions is if I should use MacBook to do all designs if I can have all this software to run on Mac or I have to use windows software to operate it? I have separate small computer connected to the cnc table who have Mach3 on it please help. Also if you know any other software much easy for beginners please let me know thank you guys!
    My email if needed is r1jastrzebski@gmail.com

    Additional Information:


    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:

    Click the link to add information to this solution:
    CAN I USE AN APPLE COMPUTER TO RUN THE CNC?

  • How do I recover my MACH4 hobby license?

    To recover your Mach4 hobby license, email us the PC-ID (in the help-about section of Mach4). If this is a new computer you are trying use for Mach4, email us the old PC-ID, or your name if you don't have that PC-ID anymore, and the new PC-ID so we can re-issue a license for the new computer.

    Click the link to add information to this solution:
    How do I recover my MACH4 hobby license?

  • WHAT IS THE DIFFERENCE BETWEEN MACH3 AND MACH4?

    Standard Version Features Mach3 Mach4 Hobby Mach4 Industrial
    Number of Planners 1 1 1
    Number of Axis 6 6 6
    Out of Band Axis (OBA) 0 1 6
    Slave axis (uses up coordinated axes) 3 N/A N/A
    Slave motors (does not use up coordinated axes) N/A 4 per Axis 4 per Axis
    API Interface - Open to All Hardware Yes Yes Yes
    Extended Plugin Support Yes Yes Yes
    User customizable GUI Yes Yes Yes
    Unified (GUI) Interface - PLC, CNC, etc.. Yes Yes
    Unlimited IO Yes Yes Yes
    Modbus PLC Yes Yes Yes
    PMC (Ladder Logic addressing for cnc/plc) Yes Yes
    Unlimited File Size Yes Yes
    Tool Path Display Yes Yes Yes
    Tool Path Speed & Quality Low High High
    Scripting - Customization Yes Yes Yes
    LUA Scripting - simple, fast, cross-platform Yes Yes
    - Lua sockets (ftp, http, smtp,..) Yes Yes
    - SSL (security layer) Yes Yes
    - LFS (manage large files and data storage) Yes Yes
    - Seriel port Yes Yes
    - Enraving of part numbers / serial numbering of parts Yes Yes
    - Plugin panel objects Yes Yes
    IPC Library for Data Sharing/tracking (Interprocess communication) Yes Yes
    Full Feature Screens/Controls Per Machine Type Yes Yes
    Currently Availabe: Mill, Router, Lathe, 3d Printer Yes Yes
    Multiple gcode Interpruters (Per Machine Type) Yes Yes
    Probing - Intergrated in standard screens Yes Yes
    Simulated 3d Machining (with additional plugin license) Yes Yes
    Tool Life Management (G10 L3 command) Yes
    Screw Mapping Yes
    Professional Screen Designer (advanced G.U.I.) Yes
    - Screen Animation Control Yes
    - Screen Integrated Tool Table Control Yes
    - Screen Integrated Work Offset Control Yes
    - Screen Integrated gcode editor Yes
    - Screen Artsoft Wizard Package Integration Yes
    Macro B gcode Programming (#variables) Yes
    - User definable gcodes via marco calls Yes
    - Macro Calls: G65, G66, G66.1 Yes
    - gcode via marco call (custom G codes via macro B) Yes
    - mcode via macro call (custom M codes via macro B) Yes
    - mcode via sub code (custom M code via sup program) Yes
    - Conditional gcodes Yes
    - set VN call - define variable names Yes
    gcode Editor Included Yes
    Scripted M code (custom M code via LUA script) Yes Yes
    Variable Speed Spindle Yes Yes Yes
    Spindle Relay Yes Yes Yes
    Coolant relay Yes Yes Yes
    Mist Relay Yes Yes Yes
    Threading Yes Yes Yes
    Rigid Tapping Yes Yes Yes
    Single Block Yes Yes Yes
    Block Delete Yes Yes Yes
    Optional Stop Yes Yes Yes
    MACH CNC CONTROL SOFTWARE MAIN FEATURES AND VERSION DIFFERENCES
    Standard Version Features Mach3 Mach4 Hobby Mach4 Industrial
    MACH CNC CONTROL SOFTWARE MAIN FEATURES AND VERSION DIFFERENCES
    Cutter Comp Yes Yes Yes
    Fanuc Type C Cutter Comp Yes Yes
    Fixture Offsets Yes Yes Yes
    G51 Scaling Yes Yes Yes
    G92 Offsets Yes Yes Yes
    G52 Offsets Yes Yes Yes
    Event Driven Yes Yes
    Multi Line MDI Yes Yes
    Subs In MDI Yes Yes
    OpenGL Optimization Yes Yes
    Multi-platform OS Compatibility Option Yes Yes
    Online Support Yes Yes Yes
    Phone Support Option Available Yes
    Support Priority Yes
    Available to End Users as "Do-it-yourself" Yes Yes
    Summary - Mach3 versus Mach4 :
    Mach4 Hobby is the closest comparable version to Mach3, yet it is still much more advanced. The price point of these versions is nearly
    identical. Mach3 is very popular for hobby enthusiest and is used in highly modified form by some great OEM's. In general, Mach4 is more
    complex than Mach3 and follows cnc industry standards. Mach3 has many customizations to make it easier for hobby users, but can lead to
    difficulties if users plan to apply their knowledge to more advanced systems. Mach4 is built as a full featured cnc controller capable of high
    speed machining for servo and stepper systems. Mach3's feature set is complete, while Mach4's will continue to expand. If you are new to cnc,
    Artsoft highly recommends using and learning Mach4 even if it appears that Mach3's feature set will be adequate for your needs.

    Click the link to add information to this solution:
    WHAT IS THE DIFFERENCE BETWEEN MACH3 AND MACH4?

  • HOW CAN ENHANCE THE BLACKTOOTH?

    Temperature probe monitor. Very valuable. This keeps you up to date on your coolant temperature levels.

    Voltage meter. This will tell you the exact level of voltage/power you are running telling the laser to run at instead of an arbitrary mark on a drawn wheel around your POT.

    Ammeter sensitive to 1mA. This will be sure your not over driving your tube and reducing it's life significantly.

    Hour meter. This will tell you exactly how long your system has been 'on' giving you a more accurate bead on the length of your tubes life.

    Exhaust fan upgrade. The current fan included is 100CFM. You can buy 120mm fans that push 250CFM and I have included a guide on how to go about doing this here. http://buildyourtools.com/phpBB3/viewto ... 8cdd1802bf

    To push the exhaust fan even further, if you have the room/power, I would highly recommend investing in a 600+ CFM "Dust Collector" system. 250CFM is still not suffice to draw all the smoke that can come off of 3mm or 1/8 MDF cutting job.

    A cutting surface. I bought myself a aluminum 'egg crate' mesh from my local HVAC company. They are used a cover for fluorescent lights and work great for low impact cutting surface. They come in 4'x8' sheets and are easily cut to fit. The other side is if you can find a steel honeycomb cutting bed to fit. These can be quite costly or fairly affordable depending where you are looking. The benefit of a steel honeycomb is you can use high power magnets to hold material down.

    Click the link to add information to this solution:
    HOW CAN ENHANCE THE BLACKTOOTH?

  • CAN WE SHIP TO MALAYSIA OR IRAQ?

    Yes we can ship to either country. Sometimes we may have to use a particular carrier, which could result in a higher shipping cost.

    Click the link to add information to this solution:
    CAN WE SHIP TO MALAYSIA OR IRAQ?

  • HOW DEEP CAN CUT IN ONE PASS?

    If you use the 2.2kW spindle, it can cut at 3/4 inch or 19 mm deep with at least a 1/4" cutting diameter single flute end mill. You will get better results with larger diameter end mills, but that is the worst case scenario. I still recommend doing a finishing pass on the edge to make sure everything is perfect.

    Click the link to add information to this solution:
    HOW DEEP CAN CUT IN ONE PASS?

  • CAN YOU SHIP ITEMS TO MY COUNTRY?

    You can determine if the country is serviceable by:
    - selecting the items you want to purchase on the website
    - go to the cart (shopping cart top left of any webpage)
    - log in, or register
    - Enter the address and click on calculate shipping.

    The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

    Click the link to add information to this solution:
    CAN YOU SHIP ITEMS TO MY COUNTRY?

  • HOW MANY AXES CAN MACH 3 CONTROL?

    Mach 3 CNC software can do the following:

    Converts a standard PC to a fully featured, 6-axis CNC controller
    Allows direct import of DXF, BMP, JPG, and HPGL files through LazyCam
    Visual Gcode display
    Generates Gcode via LazyCam or Wizards
    Fully customizable interface
    Customizable M-Codes and Macros using VBscript

    SET:

    Spindle Speed control
    Multiple relay control
    Manual pulse generation
    Video display of machine
    Touch screen ability
    Full screen eligibility

    EQUIPMENT:

    Lathes
    Mills
    Routers
    Lasers
    Plasma
    Engravers
    Gear cutting

    Additional Information:
    how to wire relay with mach board. I have mach interface board with one relay

    Click the link to add information to this solution:
    HOW MANY AXES CAN MACH 3 CONTROL?

  • HOW CAN COOL THE LASER TUBE?

    Cooling is not as tricky as you might think. There is 3 ways to approach this, only 2 really matter for a low scale 40w setup. First one is the cheapest and easiest. The higher the temp of water the worse your performance will be, from what I understand anything in the 30C range is about the most tolerable it gets. Lower is better. But not frozen...from what I've been told a very experienced cutter, he found 8C was the highest power he achieved.

    1. Use a 5 Gallon resovoir system which gives you a fairly large space of water to heat up before you need to tend to it. Add about a cup of anti-freeze to the mix of DISTILLED water. You don't want ANY minerals in the water that might build up in your system. The anti-freeze works to keep algae and other ickies from growing in your water.

    2. Use a smaller resovoir system (or even closed loop) and install 1 or more radiators found in CPU cooling systems with 120mm fans attached. This will continously cool your water system to ambient room temperatures, but with a tiny resovoir it will be difficult to add things like ice-packs to drop the temps if the ambient is quite hot.

    3. Using an industrial coolant system. Overkill and unless your cutting A LOT, this is a very expensive option to take. You can also explore the idea of Peltier cooling but it is extremely expensive electricity/BTU wise compared to an industrial cooler.

    Click the link to add information to this solution:
    HOW CAN COOL THE LASER TUBE?

  • CAN YOU SHIP TYO MY COUNTRY?

    You can determine if the country is serviceable by:
    - selecting the items you want to purchase on the website
    - go to the cart (shopping cart top left of any webpage)
    - log in, or register
    - Enter the address and click on calculate shipping.

    The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

    Click the link to add information to this solution:
    CAN YOU SHIP TYO MY COUNTRY?

  • CAN I USE A MAC TO CONTROL THE CNC?

    There are several CAD/CAM programs out there for MacOS. Here is a list of a few: http://www.macuser.de/forum/f53/3d-2d-cad-395058/#post4499316
    I've also read good things about punchCAD: http://www.punchcad.com/
    Of course, there is always SketchUp if you are in a pinch. There are a few CAM plugins for SketchUp as well, but I've never used them, so I can't vouch for them.

    CAD/CAM will get you as far as designing your parts and producing the g-code, but if you also want to run the CNC machine with your Mac, you will need a piece of software similar to Mach3 or EMC to run the g-code. I haven't been able to find anything like these programs that runs on Mac, so you may have to run Mach3 or EMC in Windows using Boot Camp or a virtual machine such as VMware or Parallels.

    Personally, I would use the Mac to do all the CAD/CAM, then use a cheap PC to run the CNC machine.

    Additional Information:


    Additional Information:
    EasyDNC for OSX
    www.dnc-x.com

    Additional Information:


    Additional Information:
    Hi guys I’m new to the cnc and I’m beginning to learn how to operate and cad-cam software also my cnc runs on Mach3 my questions is if I should use MacBook to do all designs if I can have all this software to run on Mac or I have to use windows software to operate it? I have separate small computer connected to the cnc table who have Mach3 on it please help. Also if you know any other software much easy for beginners please let me know thank you guys!
    My email if needed is r1jastrzebski@gmail.com

    Additional Information:


    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:
    Hi , thank you for your advise!

    Additional Information:

    Click the link to add information to this solution:
    CAN I USE A MAC TO CONTROL THE CNC?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.