Cool your "Water Cooled" spindle for your CNC Router or CNC Machine with this compact kit of pump, water reservoir, fan, radiator, G1/4 fittings and silicone tubing.

This is a plastic check valve that allows air to travel one way to prevent pressure loss. Designed for frequent use, the valve is able to be cycled up to once per second.

This is a compact Air Pump rated at 1.8W with an output of 1.5L/min. When used in conjunction with a Laser Tube assembly: air is pumped into the nozzle to provide positive air pressure in the nozzle cavity so debris does not enter the nozzle

5 Gallon, 125 max PSI Air Tank used to either hold lots of air, or hold lots of vacuum. We generally use this to hold a vacuum for picking and placing.

Submersible Water Pump. Output is 370 Gallons (1400 Liters) / hr. 220v or 110v options available. Includes hose fittings and small hose.

1/4" barbed to male tube fitting fits with a 1/4" female inside thread tube fitting to allow a flexible hose to attach to water or air tools.

1/4" NPT female to 1/2" NPT male tube fitting fits with a 1/4" barbed to 1/4" male tube fitting to allow a flexible hose to attach to pneumatic and hydraulic tools.

Use these tubes for pressurized gasses (air) or liquids (water).

If you need to create a vacuum, this pump will draw a vacuum down to 5 Pa. Remember that normal atmosphere, around sea level is 100,000 Pa or 100 KPa. The vacuum pump is very small for its power (1/4 HP). The volume of air that it can move is 3 CFM (Cubic Feet Per Minute). This item also goes well with our vacuum pressure sensor switch.

This vacuum regulator will turn on a vacuum pump when the vacuum gets too low in the vacuum chamber or tank. The vacuum regulator will keep a specific range of vacuum in the vacuum chamber.

This is a tool to serve as a pick up for SMD parts and placing them on a PCB board. This part accepts a tube to connect to a vacuum source and a tip to pick up small parts. If larger SMD parts are needed to be moved, vacuum cups are included for this purpose.