[ Log In ]
[ Register ]
Price Options Your Cart $0.00
1/2" to 1/2" Steel Rigid Coupling
$21.00
Introduction:

Generally, the motor shaft with a 1/2" diameter will be inserted in one end, and a shaft, or lead screw also measuring 1/2" in diameter will be inserted into the other end. The screws that clamp the shafts will be tightened. These steel clamping coupling are for use with high torque motors and high inertia when the motor is changing directions.

Description:

1/2" to 1/2" - (Rigid Coupling (Steel) - 1/2" bores at each end)

Related Tutorials
Step 21: Driver Caps, Resistor Networks and Mosfets
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The resistors are in, right? Ah, I know, you want to see the complete assembly before you dig in. Ok, on to this part of the assembly. Please don't ask me what Mosfets are, but the word sound cool! I can tell you that they stand for Metal Oxide Semiconductor Field Effect Transistor. I have personally read about fifty descriptions of this electronic animal and I still can't figure it out. It doesn't say much for a Berkeley grad! Well, I'm open to some plain English interpretations without the word "drain" in them. Are you still with me?
Step 20: Stepper Driver Part 1 - Resistors
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. Well... here we are, finally getting started with the electronics portion of the video series. The entire structure of the CNC machine is complete with the exception of the router mount. We will get to that a little later. For now, we will start on the assembly of the HobbyCNC 3 axis chopper unipolar stepper driver.
Some Information about End Mills (Rotational Cutters) for CNC Machines
I receive a healthy dose of questions about end mills and which ones that I use. I usually respond with answers like, my end mill will probably differ from your end mill. So, what is this thing called an end mill anyhow? If you are new to CNC machining and routing, you may have never heard of the thing. I could imagine googling something like, "CNC bits". Using the terminology "bit" is not all that incorrect. Bits are commonly referred to as drill bits, but routers use router bits. If you're looking to cut various metals and composites, end mills are the tools of choice. However, end mills will also work on wood, depending on the type of end mill selected.