To have a complete kit, these will be the following items that are most common to add to the order:
Motor Cable (20 AWG 4 conductor) = 30Ft (X-axis 9Ft, Y-axis 10Ft, Z-axis 11Ft)
Spindle/Inverter 2.2kW either 110V or 220V
Silicone tubing 1/4" ID - 3/8" OD (desired length or 24' to have your water cooling container right next to the machine)
Water pump either 110V or 220V
Cable carrier (cable management), default length: 5Ft.

Other accessories:
Different collets 1/2" or 1/8"
End Mills

Please call: 281-815-7701 for further assistance on purchase

Click the link to add information to this solution:
I'm intending to order a black toe machine for shipping to New Zealand. Postage will be a very significant part of the cost. What components do people buy in follow up ordets that may make sense to add to my order?

You will need to build the table unit for your machine. There are instructions on how to do this at the bottom of the product page here, https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4
There is no estimate on how much this will cost though, since there are too many variables involved to do this.

- PC with parallel port and USB port
- 20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
- 18awg stranded wires for power supply to drivers
- 24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx

This answer is applicable to most of our machines with the exception of the greenLean and the blueChick since those machines are equipped with a table structure.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
If I purchase a greenBull 6X Long Z CNC Machine Kit and Mach3, what else would be required to assemble the working machine? I have CAD software.

You will need to build the table unit for your machine. There are instructions on how to do this at the bottom of the product page here, https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4
There is no estimate on how much this will cost though, since there are too many variables involved to do this.

- PC with parallel port and USB port
- 20awg stranded wires for the motors - http://www.buildyourcnc.com/electronicscombo.aspx
- 18awg stranded wires for power supply to drivers
- 24awg stranded wires for breakout board to drivers
(location and spacing of components varies from one person to another, so we do not provide cables/wires)
- General purpose extension cord (cut the female end off) to provide power to power supply
- USB cable to power breakout board
- Parallel cable to communicate to breakout board
- Router
- (optional - instead of router) Spindle with power inverter http://www.buildyourcnc.com/SpindlesAndAccessories.aspx
- (if purchasing spindle with inverter) General purpose extension cord (240v) (cut the female end off) to provide power to power inverter
- End Mill(s) http://www.buildyourcnc.com/ProductsEndMills.aspx
- CAD, and/or CAD-CAM software (to produce geometry, machine operations, and g-code) http://www.buildyourcnc.com/CNCsoftware.aspx
- CNC control software (to read g-code and control machine) http://www.buildyourcnc.com/CNCsoftware.aspx

This answer is applicable to most of our machines with the exception of the greenLean and the blueChick since those machines are equipped with a table structure.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
IF I PURCHASE A GREENBULL 6X LONG Z CNC MACHINE KIT AND MACH3, WHAT ELSE WOULD BE REQUIRED TO ASSEMBLE THE WORKING MACHINE? HAVE CAD SOFTWARE.

There is a multitude of methods to create the table and frame for the greenBull long-z CNC machine, as some of the illustrations are shown on our gB webpage.

The image with the hollow mid section, is a custom table that will take advantage of the entire long-z axis assembly. So the frame can be built in that manner, however the CNC table should have its 3/4" table top. So you can cut standard sheets of wood, aluminum, plastics, etc.

So that specific illustration is not needed, however if you plan on cutting at that depth then it will defiantly benefit you to have that frame as shown in the illustration!

Click the link to add information to this solution:
Can you please clarify what a long Z axis table should look like? I've built a frame that matches the dimensions on the GreenBull page but under long Z it says a custom frame is required made out of steel, which I did. But do I need to have the frame open like shown in the picture or is that just showing what the table looks like under the 3/4 material?

The 5x10 greenBull base kit comes with the structure, hardware, and electronics for motion control. In order to have a fully functional CNC you will need a table base for your machine, a spindle or router to handle your cutting applications, end mills (bits) for cutting, CAD, CAM and CNC software, and a computer. There are also accessories you can add such as limit switches, emergency stops, and cable carrier for cable management. If you are looking for more information or a formal quote please contact sales@buildyoucnc.com

Click the link to add information to this solution:
I'm not sure of ALL the things I will need to do some of my ideas for the cnc machine. I'll mostly be cutting out 3/4" plywood projects. How much minimum for a 5' by 10' system? I need the hardware and software to get the job done. I saw the price for your basic unit 3-4 grand but don't know what all I NEED to start work.

The greenBull 4X comes with all of the components and electronics to assemble the gantry of the machine. You will need to build the table. We provide the rails and roller chain for the X-axis (along the length of the table for full 8 feet of travel). You will need to provide some wire to connect the electronics and a computer to run the machine. You will also need to purchase the software that you will need to run the machine that matches how you will apply the machine. We suggest the mach3 control program. The CAM program is up to you as there are many options out there.

Click the link to add information to this solution:
I am interested in buying the greenBull 5X Long Z CNC Machine Kit, but it is not clear for me what is included in this kit. Is there anything else I need to get the machine work?

Our SBR20 rails use M8 bolts and are suitable for use with 8020 aluminum or any other common machine material. We suggest the use of our ball bearing pillow blocks with these rails, which you can find on our website here: https://buildyourcnc.com/item/mechanical-rails-linear-ball-bearing-block

Additional Information:
HOW TO FIND WIDH 38 HEIGHT 26 LINER GUIDE RAIL

Click the link to add information to this solution:
What are the hole spacing dimensions for the Linear Guide Rail 20mm? I'm trying to figure out what size aluminum extrusion to purchase so I can mount these to it.

The plans for the whiteAnt 3D Printer will have the dimesions, and the dimensions will be on the individual pieces(cut to spec). The machine is relatively small, so maybe you expected the size(dimensions) to be larger.

Click the link to add information to this solution:
The plans available for download for the "whiteAnt 3D Plastic Printer" do not have dimensions. Are the dimensions shown in the book? Is there a DWG file available?

If your Z axis is moving in the opposite direction, go into Mach3, click on config, ports & pins, then click on the motor outputs tab. You will see the axes labeled on the left and the parameters labeled on the top of this dialog box. Toggle the dir low active for the z-axis.

Additional Information:
What if I'm having the same issue on a different axis?

Additional Information:
You can follow the same procedure as with the z-axis. When you get to the motors outputs tab, toggle the dir low active checkbox for the axis that you would like to change.

If you are using another control program, let me know and I will add the recommended action here.

Additional Information:
Girbl

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:
I have a grbl laser machine tronhoo machine that is running back wards and side ways wrong help

Additional Information:

Click the link to add information to this solution:
My Z-axis seems to be reversed on a fully assembled machine... I've tried reversing it in the config settings on Mach 3, but to no avail. What do I need to do? IS this a wiring issue that was not done correctly at the factory?

This is a good video on how to do a vacuum table

Click the link to add information to this solution:
Do you have any videos or plans for how to make a strong table for a large CNC router? I saw the torsion box videos but would like some more guidance on how to build just a good table.

The leadscrew length for the greenBull long Z-axis is 47 inches.

Additional Information:

Click the link to add information to this solution:
BUILDING ONE OF YOUR GREENBULL 6X LONG AND 2.2 KILOWATT SPINDLE DOES NOT FIT. SEEMS LEAD SCREW YOU SENT WITH KIT IS SHORT 42" LOOKS LIKE IT NEEDS TO BE 5 OR 6 INCH LONGER. THIS CORRECT? WHAT THE NEEDED LENGTH FOR UNIT?

Feedback and positioning:

- Open-loop is where the computer does not have feedback, but it has the current position as per the number of pulses it has sent to the stepper motors. As long as the stepper motors are tuned so that there is a safety factor, then your machine will always be at the correct position. This scenario is common and typical for CNC machines

- Closed-loop is where the computer receives feedback from the motors and is common on very high end CNC machines. The computer sends the pulses, or signal for the motors to attempt to achieve a particular position. The servo motors will use a PID (Proportional Integral Derivative) to continue to achieve a particular position where the driver/computer will tell the motor to go back and forth (getting better as it goes) for the position. This back and forth (the PID in action) is usually imperceptible.

Click the link to add information to this solution:
I forget the term for it, but are the encoders "absolute" in regards to their positioning? So if for some reason a cut is interrupted the machine can regain its position?

If you are using Mach3, the setting for the input pin 10 may be enabled as a default for use with the Emergency Stop. If there is no emergency stop on that pin, the reset will trip every time.

Click the link to add information to this solution:
I have the redleaf system for my black toe machine I have wired my limit switches in series NC after setting up in mach 3 I still get limit switch tripped after apply and ok setup can only run if I disable what am I doing wrong

The lasing area for the blackTooth v2 is 20" x 24" or 580 x 600 mm.

The dimensions for the machine in general will be on the main product page when the videos are completed.

Thank you for the kind words.

Additional Information:
The lasing area for the blackTooth v2 is 20" x 24" or 580 x 600 mm.

The dimensions for the machine in general will be on the main product page when the videos are completed.

Thank you for the kind words.

Click the link to add information to this solution:
Hi, question about blacktoothv2 laser engraver, what is the cutting area of the laser machine as I don't have clue how big it is, and are you’ll just use it like that ore it’ll have a moving Z axis, waiting for video 5, interested how it will progress. It’ll be very useful if you’d mention some dimensions during the installation. Thanks and keep up good work

The lasing area for the blackTooth v2 is 20" x 24" or 580 x 600 mm.

The dimensions for the machine in general will be on the main product page when the videos are completed.

Thank you for the kind words.

Click the link to add information to this solution:
Hi, question about blacktoothv2 laser engraver, what is the cutting area of the laser machine as I don't have clue how big it is, and are you’ll just use it like that ore it’ll have a moving Z axis, waiting for video 5, interested how it will progress. It’ll be very useful if you’d mention some dimensions during the installation. Thanks and keep up good work

Dealing with orders a few years ago, we did supply the g-code files for the machines that were purchased. However we do not supply any files to recreate our machines at the current moment nor do we plan on giving them in the future.

Click the link to add information to this solution:
I built a machine using your original tutorial years ago. Do you still offer the code to run on this machine to make the 4x8 black toe?

The leadscrew length for the greenBull long Z-axis is 47 inches.

Additional Information:

Click the link to add information to this solution:
Building one of your greenBull 6X Long and 2.2 kilowatt spindle does not fit. Seems lead screw you sent with kit is short 42" looks like it needs to be 5 or 6 inch longer. Is this correct? What is the needed length of lead screw for this unit?

The motor is helped by the mechanical leverage of the screw. The 425 oz-in motors that are included in the standard electronics combo has very high torque for that type of machine. You will have no problem using that motor for the book machine.

We use that motor for very heavy spindles on the blackToe and blackFoot CNC Machine kits.

You will need to do the mechanical leverage calculation along with the torque of the motor to determine the actual weight it will lift. The calculation will need to consider the type and pitch of the screw and it would also consider the gravity constant of 9.8 m/s/s.

If you need me to determine this formula and work out the calculation based on the screw you are using, please let me know.

Additional Information:
thank you for the reply. I would be really good to know the calculation. The lead screw is 1/2" diameter with 13 TPI. Please provide the calculation. And one more question. If I am cutting 18mm MDF with 6mm cutting bit (so 6mm pass), what can be the maximum speed rate of cutting and spindle speed of router?
thank you

Click the link to add information to this solution:
I received the electronics for book build cnc machine. I need to know how much weight the z-axis motor can hold since my (craftsman) router seems to be heavy. It is 2HP with variable speed

You will find a blackToe USB version on the product page:

https://www.buildyourcnc.com/Item/cnc-machine-blacktoe-v4-2x4

Click the link to add information to this solution:
Looking to buy a black toe 2x4, what electronics are included ? Is it optional with USB-interface? And for last do you ship to sweden?