The mach3 control software will work with all major CAM software (CAMBAM, Aspire and Vectric, BobCAD/CAM, ArtCAM, Dolphin CAM, CAM software that integrate with SolidWorks and AutoDesk Inventor, and many more).

Click the link to add information to this solution:
Is there a kit or actual product that can be wired into the Mach3 controller to give me virtual zero

You can always come to our offices in Katy TX. If that is not an option, we can do cut in our shop and record video for you. Specify what you would like to cut and we can consider doing this for you.

Thanks. I've reviewed the gallery and think my question comes down to this- Can I do hardwood carving like Mike M.'s guitar display cases and cut 3/4 inch baltic birch plywood with the same machine?

Absolutely, the cutting and machining is more a function of how the machining operations are created and specified. Baltic birch is not a tough material and you will be able to cut very aggressively with any of our machine kits.

Click the link to add information to this solution:
Where is the best place to see projects made with BuildYourCNC CNCs? I would like to get an idea of carving capabilities and cutting Baltic Birch plywood. Thanks.

The datasheet for the parallel breakout board is here:
https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay#prettyPhoto/2/

The datasheet for the USB interface is here:
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-USB-Controller-Breakout#prettyPhoto/2/


Additional Information:
20

Click the link to add information to this solution:
I need wiring instructions for the breakout board you sent yesterday. It is not like the one in the videos and I don't know where to connect the 5V. No data sheet or anything.

There are many possible options for making a lathe. Typically, a lathe is run by a spindle at the head stock (which you can find here https://buildyourcnc.com/SpindlesAndAccessories.aspx) which will rotate the object rather than a fourth axis, however you will need to create or buy the clamp mechanism of a regular lathe to hold the object in place. You will be able to control the on/off either manually or via software, but the speed (RPM) will have to be controlled manually.
You can create a more indexed alternative to a lathe by using our rotary axis at the head stock (found here https://buildyourcnc.com/item/axes-4th). either way, the tail stock center can be found here https://buildyourcnc.com/item/axes-4th. This will give you full control of the turning via software.

You will want to use linear rails and their associated bearing blocks (found here https://buildyourcnc.com/item/mechanical-rails-HIWIN-Linear-20mm and herehttps://buildyourcnc.com/item/mechanical-rails-linear-guide-rails-20mm) to run along the length of the item being turned and you will need linear rails to be run perpendicular (towards and away) to the object being turned that would hold either the blade (for a traditional lathe) or a spindle (for the indexed version containing the rotary axis).

Where you have linear rail, you will also need lead screw (found here https://buildyourcnc.com/item/mechanical-leadscrews-lead-screw-!5-5-starts-10-tpi) to transmit motion using motors (and drivers) of your choice also with various options (found here https://buildyourcnc.com/category/nema and here https://buildyourcnc.com/category/driver). You will need 2 - Drivers (either 3.0A or 6.0A, the 6.0A driver will be for our larger motors hence you will have more torque available) and 2 - Motor's (either our Nema 24's or Nema 34's, the Nema 24 will work with our 3.0A driver while the Nema 34 will work the 6.0A)
To control these motors, you will need a parallel breakout board and Mach 3 software to control the two axes (or three with the rotary axis) found here https://buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay and https://buildyourcnc.com/item/control-SOFTWARE-mach3.

You will need couplings to couple the lead screws to the motor shafts (found here https://buildyourcnc.com/couplings.aspx). All of the miscellaneous hardware you need can also be found here https://buildyourcnc.com/Hardware.aspx.

Click the link to add information to this solution:
CNC Wood Lathe project - Would like to have the guts to a 2 axis DIY lathe. Can you let me know of a possible one stop shop solution? Would like it to be at least 40" on the X axis.

According to the supplier of the 2.2 kW spindle, the safest operating speed for the spindle is 6000 RPM. The supplier also stated that theoretically, the spindle can operate from 0 to 24,000 RPM. I am continuing a dialog with the supplier to delve deeper into understanding the configurations and ramifications of such configurations for operations outside of the safe boundaries into the "theoretical" ranges.

Additional Information:
20

Click the link to add information to this solution:
I would like to know what the lowest rpm that can be acheived with the 2.2kw spindle and inverter and still have enough torque to drill

This would totally work for that application. This cable carrier is used for any object that needs to move and carries some electrical or tubing within it. This cable carrier is great for cable management where you want to make sure the wires and tubes are in a position that you set, not where the wires and tubing want to go.

Click the link to add information to this solution:
[311] I am looking to use this type of thing with a pipe for theater. Where the pipe can be lowered and it would have electrical and signal cable inside. Is this good for that or should I look at something else?

Yes, our porter cable collets and nuts will fit the porter cable 7518.

Additional Information:

Click the link to add information to this solution:
HAVE PORTER CABLE 7518 ROUTER ON MY CNC AND WOULD LIKE TO KNOW IF YOUR ER20 COLLET NUT, FOR THE CABLE, WILL FIT ROUTER.

Usually this does happen, we tend to clean the water out roughly every month, however we use our machine 8hrs a day, 7 days a week non stop. So Depending on your usage it might be every 3-5 months when you might have to change the water.

We use a small air compressor to blow the build up through the spindle.

Click the link to add information to this solution:
I have the same water for months to cool the spindel and it's blocked, what can I use to unblock it? I would not like to damage any seal or gasket inside.

What organization are you with and how will you use the CNC?

Click the link to add information to this solution:
I would like to do a review on your 4x8 table, we are the new kids in town looking to give honest reviews no BS. We want no affiliate bonus or sponsorship we only ask for free product so that we can educate ourselfs and others while giving honest feedback

Currently we planned on having upgraded electronics with the whiteAnt 3D printer, which would have had the ability to support the heated bed, and other options. Which is why there was a configuration file in the downloadable files. However in newer developments we have been working on our prototype blackAnt 3D printer which will have the upgraded electronics and the option for the heated bed, but currently our whiteAnt cannot support the heated bed with the gen4 electronics supplied with the kit.

Click the link to add information to this solution:
Whiteant- In the software there is a configuration for a heated bed. Where would I wire this in the kit's electronics if i bought one? Would the temperature be on/off or PID?

Dealing with our USB BoB, the potentiometer that will be used in the key jog, is a 5V, 5k - 10k Ohm potentiometer.

Click the link to add information to this solution:
I am building a cnc mill using your USB controller and i would like to know what is the specification of potentiometer used for adjusting manual axis jog speed

CNC kits normally take 5-7 business days but during busy periods this can increase.

Click the link to add information to this solution:
Hello, I purchased a cnc kit 3 days ago and I would like to know how long does it take to prepare a shipment? thanks

If you were logged in when you made the purchase, you can click the "My Account" link at the top of any page on this website and see all of your orders, order line items (with direct links to these items), and shipment information.

Here is a link to the "My Account" page for your convenience:
https://www.buildyourcnc.com/CustomerInfo.aspx

I did not see your username on your internal customer record, so I added this username and you should be able to see the information in the "My Account" page.

Additional Information:
I just tested your accounts page and the cable carrier links are in there. Thanks and please let me know if you need further assistance.

Click the link to add information to this solution:
I have purchased cable carrier chain and would like to know if you could send me a copy of that order as I need to purchase extra lengths of the links I bought. Thanks

You can control our 40W laser power supply (which controls the laser tube) with an Arduino, if that is your intention. The trigger for turning the laser on and off uses a 5V level. To control intensity, you can use the Arduino PWM output. If you want the Arduino to move the machine as well (providing pulse trains to each of the stepper motor drivers) then you will need to make sure you consider the processing speed of the Arduino so you will be able to run the stepper motors at the speed you need for the laser engraving/cutting.

Our laser controller do all of these functions. Here is a link to our laser control system:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System



Additional Information:
Thank you! I am building a 3 axis cnc/ engraver and I think this would be a good option as well as the router head and the 3d printing head. How heavy is the tube? I may mount it directly onto one of the axis of the machine to eliminate the need to line up all three axis, similar to what you have with your xl engraver.

Additional Information:
The tube isn't that heavy, but when filled with water, it can get up to a few pounds. The key is to use the axis moving the nozzle for engraving as this requires fast back and forth motion. The cutting is generally dependent on the axes moving from vector to vector at a relatively slow motion, so this is not a problem.

Click the link to add information to this solution:
I would like to build a low cost laser engraver/ cutter, can your 40w laser power supply be controlled with an arduino or is it only controlled by the controller sold here?

The 2.2kW spindle will have the same amount of torque and strength using either the 110V or the 220V inverter. Nothing will significantly change in either application since the 110V inverter has a small step up transformer which will increase the voltage from 110V to 220V to run the spindle efficiently.

Additional Information:
I'd like confirmation on this -- isn't there a cost in efficiency to having the 110v step up to 220v?

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Additional Information:
Thank you so very much for explaining this!!! I truly appreciate your help! Tricia

Click the link to add information to this solution:
Good morning, I would like to know if the strength of the 2.2kw spindle is weaker when using the 110V version of the VFD. Does it have the same power as the 220V version VFD?

You can determine if the country is serviceable by:
- selecting the items you want to purchase on the website
- go to the cart (shopping cart top left of any webpage)
- log in, or register
- Enter the address and click on calculate shipping.

The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

Click the link to add information to this solution:
I would like to order a laser cutter from Greece. Is it possible to send the kit?

If you purchase the greenLean, you will get everything you need except a router, computer to operate the machine, and software to control the machine. You state that you have a computer. You can use this computer, but you will need to determine if it has a parallel port, or if you are going to need the USB controller option. As for the software, there are too many different options for you to choose from. We would not be able to tell you which to get, and how much it will cost you. This is a matter of preference. I can tell you, however, that you will need 3 types of software to complete a CNC project. You will need CAD software to design your design, CAM software to add tool paths and convert the design to g-code, and then control software to take the g-code and operate the machine.

Additional Information:
20

Click the link to add information to this solution:
I am building a wet plasma table for my shop that is 8'x 16'. I will need hardware and software. Please heko me wuth the list, My phone is 9124273734. I would like to talk with someone if possible. Thanks, Rus

We are developing plans for our machine, but they are not completed yet. Please let me know if you would like to be added to our list of customers wanting plans. Thanks,

Additional Information:
If you have specific questions regarding CAD, CAM and Control, please add another question to the customer service and I will answer them in detail.

Click the link to add information to this solution:
How do I get started I would like to build a cnc router. Making the machine I can do, but I am weak on cad,cam and mach3. I am thinking about a 4’x4’. Do you have plans I can buy?

The best wiring diagram that can be used for the redLeaf and redSprout CNC computer system would be found on instruction #1 (datasheet for the breakout board) on this page: https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
Hi I live in South Africa and want to know if i can buy a wiring and component diagram for the readleaf plug and play computer system?