Sure, come on by! You can come and see some of our machines in action; pose difficult questions and hopefully we can answer them; and even have some tests done with stuff you bring.

Click the link to add information to this solution:
Can I come to buildyourcnc and see your machines and products?

You can measure the tramming angle by putting a long L shaped rod that will fit into the spindle's collet and affix a piece that will tough the table to the other end of the rod. Rotate the rod to determine how far out you are. The longer the rod, the more accurate the measurement will be.

Click the link to add information to this solution:
I want to fix the tramming issue, how can I measure this

The plasma nozzle must be close to the cutting area and you will need some way to keep the nozzle at the right level with some type of device. The spray is downward, so you will need a contained area with a sheet of water at the bottom to extinguish he spray. You should have no problem using our machines for this application since you would need to product the table bed.

Click the link to add information to this solution:
CAN YOUR PRODUCTS OF MACHINES BE USED TO CREATE PLASMA TABLE?

Yes the CNC will do 3D wood carving and we can ship to Mexico. email sales@buildyourcnc.com for more information.

Click the link to add information to this solution:
I have a New Hermes Vanguard 4000. It has an IS controler. I know nothing about these machines. What can I do to make it usable?

To convert the whiteAnt to a CNC machine, you will want to lower the upper structure to the lowest position to create the most rigidity overall. You will see that there are many holes below the sides of the upper structure that are evenly spaced. This is so you can adjust this lower. You will also want to fasten the lower sides to a substrate (piece of wood, or something) with l-brackets or something that has a bit of adjustment capability. This will keep the sides more rigid as well. Use a Dremel for the spindle. If you want to use a another spindle, let me know and we can product a mount for that spindle since the Dremel has poor runout (TIR). This is important if you are wanting really precise milling.

Click the link to add information to this solution:
how can I convert the whiteAnt from the 3D printer mode to the CNC milling mode?

The instructions for assembly are found in the book. If you are interested in purchasing the plans and instructional DVD please see this link https://buildyourcnc.com/cnckitintro.aspx

Click the link to add information to this solution:
I read the book and i want the vedios show assembly the CNC Machines please give me alink for vedios

If you would like to add a laser to a plasma table, you will need the following parts:

Laser tube at 40 watts:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Tube-CO2-40Watt

Mirror mounts (this will depend on the way you mount the laser tube):
https://www.buildyourcnc.com/item/Laser-Component-Mirror-Mount-20mm

Mirrors for the mirror mounts:
https://www.buildyourcnc.com/Item/Laser-component-20mm-mirror-25mm

Laser Tube Power Supply:
https://www.buildyourcnc.com/item/Laser-Component-Power-Supply-CO2-40W

Laser Focus Lens:
https://www.buildyourcnc.com/item/laser-component-20mm-lens-2-inch-50!80mm

Mirror and Lens Mount and Nozzle:
https://www.buildyourcnc.com/item/Laser-Component-Nozzle-20mm-lens-mirror

High Tension Extension Cable:
https://www.buildyourcnc.com/item/Laser-component-Power-Supply-High-Tension-extension-wire

Laser Control System:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System

Screw Posts (to connect the high tension and return wire to the laser tube, highly recommended as the leads on the laser tube are fragile):
https://www.buildyourcnc.com/item/laser-component-newbiehack-connectors-screw-terminal-binding-post

Safety Eyewear for CO2 laser wavelength:
https://www.buildyourcnc.com/item/laser-components-goggles-safety-tinted

Click the link to add information to this solution:
I have an Eagle Plasma table and I want to add a 40 laser. Can you supply me a list of what I need to make this happen.

Machine sizes outside of what is selectable on the home page, or the machine product page require a special quote. You can text me at 832-477-0526 for a quote on a unique configuration.

Click the link to add information to this solution:
[593] I want this to be 12' long. how much does that cost?

Yes, you can add a touch plate kit. A touch plate works just like a limit switch. All you need are alligator clips and a conductive plate. Solder a wire to the conductive plate material and connect that to an IN (input) terminal. Connect the alligator clip to the gnd of the input and then to the end mill. Enable the home setting for the Z axis in Mach3 or Mach4 and use the "ref all home" button to home all of the axes. The z axis will home at the touch plate. Make sure that the touch plate is under the end mill when the z-axis is in the homing process.

Here is a tutorial I made a while ago that explains this:
https://buildyourcnc.com/PrimeronHomingandLimitSwitches.aspx

Let me know what you think by click on the "submit response".

Thanks

Click the link to add information to this solution:
Do you offer a touch plate kit? If not can a touch plate kit be added to your machines if so whats the process?

Sure. You will need the proper mount for the laser tube and a mount for the power supply in relatively close proximity to the laser tube. If you have one of our greenBull CNC machines, you can use the laser/spindle head that we offer.

Click the link to add information to this solution:
Can I just purchase a laser head to replace my router when all I choose to do is print or copy a photo

Planet-CNC is the control software. If you decide to use the USB controller, you will need to use the planet-CNC software as the control software. You will be able to use any of the CAM software applications with the planet-CNC control software.

Click the link to add information to this solution:
I want to use Planet-CNC software can I use Mach3 USB Board

I do not recommend using the Mach3 USB controller to be used with a torch height controller. There are only 4 inputs on the Mach3 USB controller. We have tried to interface a Proma THC to this board without success; however, we did not exhaust all possibilities.

I would recommend the Pokeys57CNC controller to connect the Proma THC as I have interfaced these two before and they work well together.
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board

Click the link to add information to this solution:
[575] Hello. Does this USB interface board thc? I have the proma 150.

Our MAch3 USB interface boards can be located here:

https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

Click the link to add information to this solution:
Is the USB hub ready for use with Mach3 at this time, or just Planet CNC?

We are able to work with many different options to provide solutions for our customers. Please send an email to customerservice@buildyourcnc.com for further assistance with this matter.

Click the link to add information to this solution:
Is it possible to integrate the shipping costs of 2 CNC machines paid separately, but same shipping address?

Yes, you can use Mach4 wtih the Fabricator Pro CNC machine.

We have not designed a metal machine like the Fabricator Pro to lean more in the vertical orientation. Unfortunately, we haven't gotten any requests for that style of machine, and the greenLean, although a great machine and space saver, has not been our best seller.

If we get more interest in this type of machine, we would have no problem designing a machine like this.

Click the link to add information to this solution:
Do you have a model of the Fabricator pro that can be inclined line the lean? I have seen a few other machines on the market like this. Can we use Mach4 with the fabricator pro

That is correct, the only manner to get our machines is to buy one of our kits. We do not provide or sell our plans, the only CNC machine you can find on our website will be the scratch build kit and plans which is a 20' x 40' , (https://buildyourcnc.com/Documents/CNC%20Kit%201-1.pdf).

Click the link to add information to this solution:
So the only way to get one of your machines is to buy it already cut, and/or assembled? I can't cut one on my existing machine?

Yes, the greenLean can cut metals such as aluminum and brass. The gantry and Y carriage was designed to be rigid enough to handle these types of metals. The typical metal cutting techniques should be used, such as high feedrates to reduce heat buildup at the end mill, or the use of cutting fluids or cold air used at the end mill as is necessary with most machines that cut similar metals. This is necessary since the aluminum has a rather low melting point and can clog the end mill.

Additional Information:
All of our machines are capable of cutting many metals, including steel and aluminum as long as the proper CNC machining operations are used like light fast passes, and if desired, using air cooling for better performance.

Here is a video of one of our customer demonstrating aluminum cutting using air to cool the end mill.
https://www.buildyourcnc.com/tutorials/tutorial-milling-cutting-metal-blacktoe-mark-gottschalk

Additional Information:
how do I hold down material on a greenlean

Click the link to add information to this solution:
Is the Greenlean capable of cutting soft metals like aluminum or brass? Thanks

Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

Our machines are as follows (in order by size, larger at top):

The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

The 4'x8' blackFoot CNC Router:
This machine requires a table to be built by the customer.
https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

The 2'x4' blackToe CNC router fully assembled complete with table:
https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

The blueChick CNC Router fully assembled completel with table:
https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

Click the link to add information to this solution:
WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

Our machines are as follows (in order by size, larger at top):

The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

The 4'x8' blackFoot CNC Router:
This machine requires a table to be built by the customer.
https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

The 2'x4' blackToe CNC router fully assembled complete with table:
https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

The blueChick CNC Router fully assembled completel with table:
https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

Click the link to add information to this solution:
WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?