[ Log In ]
[ Register ]

Question #: 353

Question: CAN I GET DXF FILES FOR THE UPDATED PARTS OF MY MACHINE?

Current Solution

Yes, the customer will need to sign our NDA (Non Disclosure Agreement) form and send it back to us. We will then send the dxf of the specific updated part of the machine.

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
UoZD5KPp

Additional Information:
-1 OR 2+416-416-1=0+0+0+1 --

Additional Information:
-1 OR 2+291-291-1=0+0+0+1

Additional Information:
-1' OR 2+657-657-1=0+0+0+1 --

Additional Information:
-1' OR 2+849-849-1=0+0+0+1 or 'WBwHf8k5'='

Additional Information:
-1" OR 2+276-276-1=0+0+0+1 --

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@z69Jq

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Respond:

Other Possible Solutions to this Question

  • I have the build your own CNC kit 3 Axis CNC Machine 2008, were can I get the Gcode or vector files for it ? I wanted to have it laser cut

    Gcode or digital files are not available for our machines.

    Additional Information:

    Click the link to add information to this solution:
    I have the build your own CNC kit 3 Axis CNC Machine 2008, were can I get the Gcode or vector files for it ? I wanted to have it laser cut

  • Is there any way i can order replacement wooden parts for a cnc machine

    Yes, you can order replacement wooden parts, but since we don't have them as products on the website, you will need to call us directly using the number at the top right corner of the website by hovering over "need help?"

    Click the link to add information to this solution:
    Is there any way i can order replacement wooden parts for a cnc machine

  • I bought an used machine that need work how can I find the model. The owner said, he used this site for parts and manual.

    If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
    https://www.buildyourcnc.com/Item/milling

    Click the link to add information to this solution:
    I bought an used machine that need work how can I find the model. The owner said, he used this site for parts and manual.

  • Can I increase the travel speed of my machine with different lead screws?

    Changing your lead screws from a tight to a lose lead will definitely make your machine move faster as long as your stepper motors can handle the new torque that the lead screws will impose.

    Here is an example of a speed change from one lead screw to another:
    - Existing constants in the example: Stepper Motor steps 200, microstepping 1/8 making the total steps 200 * 8 = 1600.
    - Old lead screw: 1/2" allthread = 13 threads per inch (UNC)
    - New Lead Screw: 1/2" 5 starts, 10 TPI = 10 / 5 = 2 turns per inch

    Old lead screw would achieve a steps per inch of:
    1600 / (1 inch / 13 turns) = 20,800 steps per inch (You can also express the calculation as 1600 * 13 = 20,800 steps/inch)

    New lead screw would achieve a steps per inch of:
    1600 / (1 inch / 2 turns) = 3200 steps per inch

    You can see that the new lead screw requires far fewer steps to get to the same length of travel. If you maintained the same velocity for both examples, the new lead screw would travel the same distance 13/2 = 6.5 times faster. So, if your velocity was say 10 ipm, your new velocity would be 65 ipm. That would translate to far fewer burned edges and longer end mill life!

    Just remember, confirm that your motors will be able to handle the new lead screw. You will need to reduce the steps/inch causing the motor torque to increase quite a bit, so you should be fine.

    Click the link to add information to this solution:
    Can I increase the travel speed of my machine with different lead screws?

  • where is the build manual for the blacktooth laser? online? I didnt get one with my machine

    For our machines our steps for the build process can be found on the actual machine page with images to reference (please read carefully all the instructions) (https://www.buildyourcnc.com/blackToothLaserCutterAndEngraver.aspx).
    You can get further help here (http://blacktoothlaser.blogspot.ca/2013/04/index-for-blacktooth-laser.html?view=sidebar) a post made by one of our customers!

    Click the link to add information to this solution:
    where is the build manual for the blacktooth laser? online? I didnt get one with my machine

  • PARTS LIST FOR THE BOOK MACHINE

    The parts list is located on this page: http://buildyourcnc.com/cnckitintro.aspx at the bottom of the description.

    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    PARTS LIST FOR THE BOOK MACHINE

  • Would you be able to provide .DWG/.DXF files instead of .NC files for the CNC Routing Machine Kit Version 1.3 please?

    These files are no longer available. We suggest purchasing a kit, like the blackToe, or blackFoot as these kits are far more rigid and perform much better.

    https://www.buildyourcnc.com/blackToe2x4v40.aspx

    https://www.buildyourcnc.com/Item/cnc-machine-blackFoot-v4

    Additional Information:
    20

    Additional Information:

    Click the link to add information to this solution:
    Would you be able to provide .DWG/.DXF files instead of .NC files for the CNC Routing Machine Kit Version 1.3 please?

  • WHAT LEAD TIME CAN EXPECT FOR THE BLACKTOE MACHINE?

    You can expect a one week lead time for our machines.

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    WHAT LEAD TIME CAN EXPECT FOR THE BLACKTOE MACHINE?

  • WHAT LEAD TIME CAN EXPECT FOR BLACKTOE SO PICK UP THE MACHINE?

    You can expect a one week lead time for our machines.

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    WHAT LEAD TIME CAN EXPECT FOR BLACKTOE SO PICK UP THE MACHINE?

  • If i can get the autocadd drawings of the building mdf peices that need to be build are the plans detailed enough for me to make my own autocadd drawings? I have access to another machine to build my own.

    Yes, the plans are detailed sufficiently enough to produce CAD drawings. If you wish to create AutoCAD drawings from the plans that we provide, we ask that the information conform to the creative commons license established on this site.

    Click the link to add information to this solution:
    If i can get the autocadd drawings of the building mdf peices that need to be build are the plans detailed enough for me to make my own autocadd drawings? I have access to another machine to build my own.

  • I want to cut the ends of steel pipes circularly as preparation for welding by plasma cutter , can you supply small machine?

    Yes, we can supply the parts for a machine that will turn pipes so they can be cut as they are turning. Are you intending the machine to cut using a milling process, or a plasma process?

    Click the link to add information to this solution:
    I want to cut the ends of steel pipes circularly as preparation for welding by plasma cutter , can you supply small machine?

  • I need to replace the on board computer of my laser engraving machine

    What model laser cutter and engraver do you have? What is the model number of the laser controller within the laser cutter and engraver?

    Additional Information:
    VLS660 ULS machine

    Additional Information:
    VLS660 ULS machine

    Additional Information:
    replace CPU on a ULS VLS660 laser Machine

    Additional Information:
    replace CPU on a ULS VLS660 laser Machine

    Additional Information:
    VLS660

    Click the link to add information to this solution:
    I need to replace the on board computer of my laser engraving machine

  • Where can I get the spec for the Cnc machine for the machine in the book build your own Cnc machine I tried the web page but no mesurments that I found
  • USING MACH3, MY MACHINE STOPS IN THE MIDDLE OF A PROJECT. HOW CAN IT BE STARTED AGAIN FROM POINT STOPPED?

    Dealing with a mid-stop cut via Mach3, you will have to be careful if it is intentionally or unintentional. If you desire to stop your machine while in the middle of a cut be sure to stop it when the machine is moving in an upward motion on the z-axis and the X/Y-axis are stationary. Then you can choose the point (G-code) where the machine was left off and click on the Run from here button on the Program Run screen (left hand side) right above the Reset button.
    (Make sure spindle/router is running before hand!)

    Now if the machine stops unintentionally, and was moving in either the X/Y-axis, then it will be difficult to run the machine from the original point dealing with the coordinates might have been lost due the the machine continuing motion but via Mach3 the machine has stopped.

    If this occurs to fight this issue before hand, is marking your home with the spindle/router to make a hole were your home is. Although moving it manually back to home the machine can be off by the smallest amount and could cause an inconsistent cut. If accuracy is something that can not be risked, then you can home the machine about a 1/4" or 1/2" down from the original home to start your cut on the same material but loosing that small piece.

    Additional Information:


    Additional Information:
    My typical go to solution is:

    - Note the current g-code line where the machine stopped.
    - If Mach3 errored and you cannot control the machine, Exit Mach3 - you may find that reset, stop does nothing to stop the spindle. When you exit mach3, the spindle will stop automatically.
    - Restart Mach3. The DRO (Digital Readout) should show the correct coordinates where the machine position was before exiting Mach3.
    - Scroll to the g-code line where the machine stopped. You may need to go a few lines prior to make sure you are not skipping any machining operations (which is why it is a good idea to learn the basics of g-code - don't worry, it's easy)
    - Click on the "Run from Here" button.
    - Mach3 will present you with a "Preparation Move" dialog box with the location that it will move to. If the coordinates shows a position that is into the material, make sure to specify a rapid height (clearance height) so the machine will move up first and then move to the location before moving down into the material. If the spindle is automatically controlled by Mach3, make sure to check the turn spindle on checkbox. If not, make sure the router or spindle is on before clicking OK.

    Additional Information:
    My cnc router stops at gcode line 50,000 and cannot finish program. They are about 150k of lines total. I have Mach3 and have bought the additional line capability. Is 50,000 (or around that) the limit? Is Mach 4 hobby license better and in what ways? Thanks! Mike Huber

    Additional Information:
    If you have a license for Mach3, then you should be able to run g-code indefinitely. I think there is something else going on.

    Additional Information:
    Additional Information:
    If you have a license for Mach3, then you should be able to run g-code indefinitely. I think there is something else going on.
    What else could be going on?

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:
    41PBGevE

    Additional Information:
    -1 OR 2+358-358-1=0+0+0+1 --

    Additional Information:
    -1 OR 2+69-69-1=0+0+0+1

    Additional Information:
    -1 OR 2+69-69-1=0+0+0+1

    Additional Information:
    -1' OR 2+902-902-1=0+0+0+1 --

    Additional Information:
    -1' OR 2+902-902-1=0+0+0+1 --

    Additional Information:
    -1' OR 2+730-730-1=0+0+0+1 or 'Qb1SuH5C'='

    Additional Information:
    -1" OR 2+161-161-1=0+0+0+1 --

    Additional Information:
    -1 OR 2+69-69-1=0+0+0+1

    Additional Information:
    if(now()=sysdate(),sleep(15),0)

    Additional Information:
    0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

    Additional Information:
    0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

    Additional Information:
    (select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

    Additional Information:
    (select(0)from(select(sleep(9)))v)/*'+(select(0)from(select(sleep(9)))v)+'"+(select(0)from(select(sleep(9)))v)+"*/

    Additional Information:
    (select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

    Additional Information:
    -1; waitfor delay '0:0:15' --

    Additional Information:
    -1; waitfor delay '0:0:19' --

    Additional Information:
    -1); waitfor delay '0:0:15' --

    Additional Information:
    -1)); waitfor delay '0:0:15' --

    Additional Information:
    1 waitfor delay '0:0:15' --

    Additional Information:
    O6enxjIS'; waitfor delay '0:0:15' --

    Additional Information:
    0MgObbnm'); waitfor delay '0:0:15' --

    Additional Information:
    8dan23Sv')); waitfor delay '0:0:15' --

    Additional Information:
    -5 OR 898=(SELECT 898 FROM PG_SLEEP(15))--

    Additional Information:
    -5 OR 353=(SELECT 353 FROM PG_SLEEP(19))--

    Additional Information:
    -5) OR 539=(SELECT 539 FROM PG_SLEEP(15))--

    Additional Information:
    -1)) OR 919=(SELECT 919 FROM PG_SLEEP(15))--

    Additional Information:
    xjpbAodW' OR 81=(SELECT 81 FROM PG_SLEEP(15))--

    Additional Information:
    r6v9pPjr') OR 551=(SELECT 551 FROM PG_SLEEP(15))--

    Additional Information:
    RDopsUKk')) OR 996=(SELECT 996 FROM PG_SLEEP(15))--

    Additional Information:

    *DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

    Additional Information:

    '||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

    Additional Information:
    1'"

    Additional Information:
    1����%2527%2522

    Additional Information:
    @@HCYaP

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    USING MACH3, MY MACHINE STOPS IN THE MIDDLE OF A PROJECT. HOW CAN IT BE STARTED AGAIN FROM POINT STOPPED?

  • Im from chile have you ever send any machine to south america? can i buy only the mechanic and electronic things ( wood parts are much weight)

    We have sent machines everywhere across the globe and we can work with freight companies to get you a good rate on a shipment. Please email sales@buildyourcnc.com to request a quote.

    Click the link to add information to this solution:
    Im from chile have you ever send any machine to south america? can i buy only the mechanic and electronic things ( wood parts are much weight)

  • I want to increase my travel speeds. Can I change the lead screw to make my machine quicker?

    Changing your lead screws from a tight to a lose lead will definitely make your machine move faster as long as your stepper motors can handle the new torque that the lead screws will impose.

    Here is an example of a speed change from one lead screw to another:
    - Existing constants in the example: Stepper Motor steps 200, microstepping 1/8 making the total steps 200 * 8 = 1600.
    - Old lead screw: 1/2" allthread = 13 threads per inch (UNC)
    - New Lead Screw: 1/2" 5 starts, 10 TPI = 10 / 5 = 2 turns per inch

    Old lead screw would achieve a steps per inch of:
    1600 / (1 inch / 13 turns) = 20,800 steps per inch (You can also express the calculation as 1600 * 13 = 20,800 steps/inch)

    New lead screw would achieve a steps per inch of:
    1600 / (1 inch / 2 turns) = 3200 steps per inch

    You can see that the new lead screw requires far fewer steps to get to the same length of travel. If you maintained the same velocity for both examples, the new lead screw would travel the same distance 13/2 = 6.5 times faster. So, if your velocity was say 10 ipm, your new velocity would be 65 ipm. That would translate to far fewer burned edges and longer end mill life!

    Just remember, confirm that your motors will be able to handle the new lead screw. You will need to reduce the steps/inch causing the motor torque to increase quite a bit, so you should be fine.

    Click the link to add information to this solution:
    I want to increase my travel speeds. Can I change the lead screw to make my machine quicker?

  • So the only way to get one of your machines is to buy it already cut, and/or assembled? I can't cut one on my existing machine?

    That is correct, the only manner to get our machines is to buy one of our kits. We do not provide or sell our plans, the only CNC machine you can find on our website will be the scratch build kit and plans which is a 20' x 40' , (https://buildyourcnc.com/Documents/CNC%20Kit%201-1.pdf).

    Click the link to add information to this solution:
    So the only way to get one of your machines is to buy it already cut, and/or assembled? I can't cut one on my existing machine?

  • I have a blueChick version 4.2 CNC Machine with no schematics for it is there anyway possibly i can get them so i can finish putting my cnc together

    To assemble the blueChick v4.2, you will need two sets of instructions, the assembly instructions for the main body and mechanicals of the CNC machine, and the instructions to connect and test all of the electronics.

    The assembly instructions are located at this URL towards the bottom of the page (click on each picture to get a larger view):

    https://www.buildyourcnc.com/blueChickVersion42CNCMachineKit.aspx

    The instructions to connect and test the electronics can be found at this URL:

    https://www.buildyourcnc.com/CNCElectronicsandWiring.aspx

    Click the link to add information to this solution:
    I have a blueChick version 4.2 CNC Machine with no schematics for it is there anyway possibly i can get them so i can finish putting my cnc together

  • ok I Build my CNC machine table and now need a complete set for motor and software how you can help me

    Yes, I will need to know more specifics of the machine so I can recommend the correct electronics.

    Click the link to add information to this solution:
    ok I Build my CNC machine table and now need a complete set for motor and software how you can help me

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.