As long as you have enough air blowing at the cutting location, you shouldn't have a problem with charring. A 40 watt laser should be able to cut through 4 ply chipboard.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
is the 40W blacktooth laser cutter strong enough to cut through 4 ply chipboard with out horrifically burning/charring the edges? If you havent tried mabye you could as this is a must for anyone who will be using it to build architectural models. I would rather have this pre-verified before I give $2100 to have you build one

We only have these models in SketchUp. Is that a format that will be acceptable?

Additional Information:
Anything with basic profile dimensions will work just fine.

Click the link to add information to this solution:
Would you be able to supply solidworks files for the laser nozzle, mirror mounts, & laser tube? I plan to build a laser engraver and would like to model everything up before i start building to make sure it all fits.

You can test the power supply, but you will need to take extra special care since the voltage on the high tension line can be lethal. Go to this instructable to see all the step on testing the power supply:

http://www.instructables.com/id/How-to-test-and-set-a-Chinese-China-made-CO2-Laser/?ALLSTEPS

Additional Information:

Click the link to add information to this solution:
I am building the Blacktooth laser cutter. What is the safest and most accurate way to test the output of the laser power supply WITHOUT connecting the laser tube? Can I use a standard multimeter and measure the voltage output of the laser power supply?

The mxl 0.08" pitch is fine for moving the weight of a gantry that contains a 40 watt laser tube and optics. I would not advise this timing belt for CNC applications that need to move heavy items such as spindles, routers, and heavier structures that are required to move these spindles and routers around.

The mxl 0.08" pitch timing belt is also great for 3d printers.

Click the link to add information to this solution:
Originally bought the Blacktooth Laser kit, but the upgraded laser tube size and needed a larger casing. With that I need to upgrade the belts to a 36" run. Can you advise whether the mxl.08" timing belt is sufficent or do I need the .2"in.

We are developing a 4 foot by 8 foot (48" x 96") laser with 80 watts of power. If you need a laser at 36" x 52", you could use the 4'x8' laser and just build a shorter table. We will have this machine available in the latter portion of 2015.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Hello, I'm wondering if you could make a larger laser cnc if someone asks for it? Something like 36" x 52". And how much would it be?

We have been quite busy during the Holiday season which is normal. This may result in extended lead times. If you would like to speak to a representative about your order please call 281-815-7701 or email customerservice@buildyourcnc.com and someone will advise you when to expect your order.

Click the link to add information to this solution:
How long does processing typically take before a Blacktooth laser cutter ships? I see a week on a lot of the answers, but my order is pushing two. Since bad luck tends to follow me around, I just want to make sure I'm still in the realm of normal processing time.

Currently we do not have that modification kit, our set up is fixed for our greenBull only modification kit we have for this model is the long z-axis kit(Designed for Foam cutting).

Click the link to add information to this solution:
I am building your "Green Bull' 6 foot wide kit and I am at the stage of attaching the motor and drive chain. I would like to know if you have an modification kit available to put the 1/2" ACME screw on the Y-axis?

If you received fewer parts than is called for in the instructions, we will send the proper parts to you. Please call us to have these parts sent to you.

Click the link to add information to this solution:
I ordered the blacktooth laser cutter, there were only 4 red spade terminals, but the instructions pictures show that there should be more and would include blue spade terminals

We will generally consider a change in dimensions or machine features if the change will be beneficial to other users as well. This is due, in part, to the time it takes to make such changes and that it maintains the desired functionality and expected safety.

What dimensional changes do you wish for the blackTooth?

Additional Information:
I was hopping to be able to have a cutting surface of 2' x 4'

Additional Information:
We have that size in our queue to be designed. However, you may be more interested in the laser adapter we are designing for the existing CNC machines to house a laser tube on the z-axis of these machines. This will be a quicker turnaround.

Additional Information:
Is there a time frame possibly to having this adapter made as well as cost? I am possibly looking to start a business so I am looking for something I can use to mass produce some specific parts.

Additional Information:
There is one project that takes precedence to the adapter, so I would expect in two months time.

Click the link to add information to this solution:
Is the blackTooth Laser Cutter available for custom size orders?

We do not currently provide any plans for our machines. We do provide a scratch build kit with plans, DVD, and hardware. You can find it here https://www.buildyourcnc.com/cnckitintro.aspx

Additional Information:
WE are a technical school and would like to build a laser cutter for the school that can cut up to 6mm plate please help us ti find drawings to build it

Click the link to add information to this solution:
blacktooth cnc laser plans, are they available? I would like to build my own parts. are there 3D cad files available?

Stepper motors are known to make noises while function, however this does not affect accuracy or job function. However we recommend to check your wiring for solid connections, and for good connectivity!



On a personal note, here is one cool video dealing with making songs with stepper motors!

Click the link to add information to this solution:
I bought and built the Blacktooth laser cutter. It works, but one of the stepper motors makes a loud static hiss a second after the CNC power supply is turned on or off, and makes loud tweets and twirps when running. It seems to operate fine otherwise. I was wondering if it was "going bad" or if that is normal?

You can control our 40W laser power supply (which controls the laser tube) with an Arduino, if that is your intention. The trigger for turning the laser on and off uses a 5V level. To control intensity, you can use the Arduino PWM output. If you want the Arduino to move the machine as well (providing pulse trains to each of the stepper motor drivers) then you will need to make sure you consider the processing speed of the Arduino so you will be able to run the stepper motors at the speed you need for the laser engraving/cutting.

Our laser controller do all of these functions. Here is a link to our laser control system:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System



Additional Information:
Thank you! I am building a 3 axis cnc/ engraver and I think this would be a good option as well as the router head and the 3d printing head. How heavy is the tube? I may mount it directly onto one of the axis of the machine to eliminate the need to line up all three axis, similar to what you have with your xl engraver.

Additional Information:
The tube isn't that heavy, but when filled with water, it can get up to a few pounds. The key is to use the axis moving the nozzle for engraving as this requires fast back and forth motion. The cutting is generally dependent on the axes moving from vector to vector at a relatively slow motion, so this is not a problem.

Click the link to add information to this solution:
I would like to build a low cost laser engraver/ cutter, can your 40w laser power supply be controlled with an arduino or is it only controlled by the controller sold here?

Is there a test button on the laser tube power supply? You can test the laser output by using the test button. This will help you determine if the laser tube is bad, or if you have wiring issues. Sometimes, wiring to he TL may not work as some controllers are set to active low, so you may need to wire the controller to TH instead.

Additional Information:
Additionally, the mA on the high tension line does not have any relationship to the digital trigger signal from the controller to the power supply.

Click the link to add information to this solution:
I am building my own laser and have watch your trocen videos.....but laser wont fire...double checked wiring and all seems correct to diagram....but the kit i bought was for a 40 watt and i amd using a 60 watt power supply and tube.....What size does the power switching unit need to be ....I think mine is too small for the trigger mA

Sure, we can send you a replacement LED indicator. Just send an email to customerservice@buildyourcnc.com, include your address and we will send it poste haste.

Click the link to add information to this solution:
The LED Status indicator on the front of my Blacktooth laser is not working any longer. I'm looking to get a replacement but can't seem to find them on your website. Do you sell replacements? Thank you.

You can use our shopping cart to determine the shipping. Add the machine and the parts you want to purchase, enter your shipping address and click on the Calculate Shipping Button to get a price for shipping. The shipping charges are determined directly from the carriers at the time of pressing that button.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
Hi, I live in Australia and am looking at purchasing the Blacktooth laser cutter and engraver. I am wondering what the cost to ship to Australia would be?

The USB interface only works with momentary switches unfortunately. If you have extensive knowledge of digital electronics, you can apply a receiver that uses a microcontroller and a transmitter with another microcontroller that produces the pulsing signal with the controls that you need.

Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I would like to make a handheld remote for the USB CNC Board using a joystick instead of momentary switches. Could you suggest one that will work with your board.

As shown in the instructions the laser tube that was used was a different model which had the metal end, compared to our full glass tube models we currently ship with the machines.
So there is no difference besides appearance between the two tubes.
The focus lens should be placed in the laser nozzle assembly and not on the laser tube itself.


Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
I bought a blacktooth laser from you about a year ago.. I am finally getting around to installing the laser tube and I noticed that my tube does't have the metal end on it like all the pictures I've seen. is this a focus lense and can I purchase one?

Yes, if you need a replacement part on your machine please call us at 281-815-7701.

Click the link to add information to this solution:
I have a blacktooth laser engraver. The Y Axis stepper motor needs to be replaced. Can you please provide me with the information I would need to replace this motor.

With our blackTooth kit, if you were to go with our lowest cost machine being $1700. With the parallel breakout board the best new beginner programs you can use, would be Mach 3 and ArtCAM, since it is a good program for beginning users.

Now if you feel a little comfortable with CAD/CAM, I would recommend CAMBAM and is a good overall software since it has a large design screen which allows you to view your design more clearly.

Additional Information:


Additional Information:
I want to avoid the Parallel Port option and go with USB. In that case, is Planet-CNC Software, and ArtCAM the best combination? Does Planet-CNC do the same thing as Mach 3 only with different physical ports?

Click the link to add information to this solution:
I'm interested in buying your blacktooth laser engraver for cutting out inlays on woodworking projects. I am new to laser engraving/cutting, and CAD. What is the simplest beginning software setup available to allow me to cut 2D shapes and letters for inlay work?