The average lifespan of a tube is 1000-1500 hours IF ran at a max of 16mA for most of it's life. It's life will go down if you run constantly at it's max rating.

CO2 laser tubes also have a shelf life. So make sure to only buy a replacement tube close to when you plan to install it, keeping it on a shelf for the future will only compromise it's life span.

To measure your amperage going through your system. You go from the negative line of the tube and run it THROUGH your multimeter/ammeter and back out to the laser PSU. This will give you your amp usage. It will not hurt your multimeter either. Just be sure your connections are very snug since 20,000V is liable to arc very easily if a connection comes loose.

Additional Information:
what is life span of CO2 generator in videojet laser coding machineVJ3320

Click the link to add information to this solution:
HOW LONG DOES THE TUBE LAST?

The length of time it will take to build a CNC machine kit is not an easy answer. There may be a wide array of circumstances that limit a persons abilities to build the cnc machine kit in an efficient timeframe; however, if you have moderate dexterity and moderately mechanically inclined, you should have no problem building one of our machines within one weekend if the project has very little downtime.

Additional Information:

Click the link to add information to this solution:
HOW LONG FOR ME TO BUILD IT?

Unfortunately I am not able to give an estimate of shipping time. This is because there are multiple shipping options, Some of them cost more than others, but ensure the package arrives in a certain number of days. Others do not give a number of days, and many factors could change the length of shipping time, such as weather, or busy season. It would be best to choose an option you are comfortable with the price of, and then Google search the typical times it takes for that option to get to you, or call the shipping company and request that estimated time from them.

Additional Information:

Click the link to add information to this solution:
HOW LONG DOES IT TAKE TO SHIP

Check step 9 on this page: http://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay

Click the link to add information to this solution:
IF YOU HAVE CIRCUIT (OR PICTURE) OF HOW THIS RELAY IS CONNECTED TO THE ROUTER

The motor cables for the blackToe are as follows:

Total 30 feet

X - 9
Y - 10
Z - 11

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
HOW LONG SHOULD THE MOTOR CABLES BE FOR BLACKTOE

The length of time it will take to build a CNC machine kit is not an easy answer. There may be a wide array of circumstances that limit a persons abilities to build the cnc machine kit in an efficient timeframe; however, if you have moderate dexterity and moderately mechanically inclined, you should have no problem building one of our machines within one weekend if the project has very little downtime.

Additional Information:

Click the link to add information to this solution:
HOW LONG WOULD IT TAKE FOR MY TO BUILD A MACHINE?

Protection from influenza vaccine is thought to persist for a year or less because of waning antibody and because of changes in the circulating influenza virus from year to year.

Click the link to add information to this solution:
HOW LONG DOES IMMUNITY FROM INFLUENZA (FLU) VACCINE LAST?

The backing material of the strip brush is .23 inches wide and .18 inches high. The material is unknown, but can easily be bent at a radius of 3 inches.

Click the link to add information to this solution:
[92] What is the backing material and it's dimensions.

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH

The parallel breakout board has a relay that can turn the router on and off according to the control software in the computer. The router will turn on automatically prior to the machine moving (a time frame can be set so the router is up to speed). When the machine is finished and is not moving, the router automatically turns off. This is with the m3, m4, and m5 codes in the g-code.

If you are interested in the USB breakout board, you will need to get an independent relay board.

Click the link to add information to this solution:
HOW THE ROUTER IS CONNECTED TO ELECTRONICS?

The parallel breakout board has a relay that can turn the router on and off according to the control software in the computer. The router will turn on automatically prior to the machine moving (a time frame can be set so the router is up to speed). When the machine is finished and is not moving, the router automatically turns off. This is with the m3, m4, and m5 codes in the g-code.

If you are interested in the USB breakout board, you will need to get an independent relay board.

Click the link to add information to this solution:
HOW IS THE ROUTER CONNECTED TO ELECTRONICS?

Three 24" x 48" sheets of mdf is used for the book build or the combo #1 plans and kit.

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
nt9ZbSRf

Additional Information:
-1 OR 2+534-534-1=0+0+0+1 --

Additional Information:
-1 OR 2+83-83-1=0+0+0+1

Additional Information:
-1' OR 2+658-658-1=0+0+0+1 --

Additional Information:
-1' OR 2+552-552-1=0+0+0+1 or '8QfEjrbS'='

Additional Information:
-1" OR 2+524-524-1=0+0+0+1 --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
MXjE3Md3'; waitfor delay '0:0:15' --

Additional Information:
gont9Py6'); waitfor delay '0:0:15' --

Additional Information:
ixm7ZgaG'); waitfor delay '0:0:15' --

Additional Information:
L3WX2lOf')); waitfor delay '0:0:15' --

Additional Information:
-5 OR 669=(SELECT 669 FROM PG_SLEEP(15))--

Additional Information:
-5) OR 526=(SELECT 526 FROM PG_SLEEP(15))--

Additional Information:
-1)) OR 99=(SELECT 99 FROM PG_SLEEP(15))--

Additional Information:
B3hszLzc' OR 556=(SELECT 556 FROM PG_SLEEP(15))--

Additional Information:
K9OJrDz1') OR 613=(SELECT 613 FROM PG_SLEEP(15))--

Additional Information:
73wbJn3w')) OR 247=(SELECT 247 FROM PG_SLEEP(15))--

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@zROBD

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
HOW MUCH MDF IS USED FOR THE BOOK MACHINE COMBO #1

I'll be honest, it can be pretty awful at times. You'll want a dedicated exhaust line. Cut a new hole, make a dedicated line. Also, invest in a charcoal air filter, it will help. Trust me. They can also be done DIY very inexpensively. Buy a "Universal Pre-filter" and simply wrap it around a screen and have air push down through the screen wrapped in the charcoal laden felt. $20 + fan + screen. Away you go =)

Click the link to add information to this solution:
HOW BAD IS THE SMOKE AND EXHAUST USING BLACKTOOTH?

Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

Click the link to add information to this solution:
DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

The blackTooth Laser cutter and Engraver can be built in a weekend. Take a look at the build instructions and try to determine if you feel you have sufficient capability to put together the laser system.

Click the link to add information to this solution:
HOW DIFFICULT IS IT TO BUILD THE BLACKTOOTH LASER CUTTER?

blueChick:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackToe:

X-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

blackFoot:

X-axis
“CW8060 (6.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/16 Microstep, 2.7A
Dipswitches: 11001100
Mach3 Motor Tuning: 1422.22 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

greenBull:

X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in

Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in

Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in


Scratch-Build / Book-Build Kit:

X-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100 (“0”=down, “1”=up)
Mach3 Motor Tuning: 1600 steps/in

Y-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Z-axis
“CW230 (3.0A) Driver”
Set to 1/4 Microstep, 2.7A
Dipswitches: 10101100
Mach3 Motor Tuning: 1600 steps/in

Additional Information:


Additional Information:
Scratch built/book CNC with NEMA 34 motors and CW8060 microstep driver

Additional Information:


Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
L8NiICEm

Additional Information:
-1 OR 2+427-427-1=0+0+0+1 --

Additional Information:
-1 OR 2+145-145-1=0+0+0+1

Additional Information:
-1' OR 2+101-101-1=0+0+0+1 --

Additional Information:
-1' OR 2+739-739-1=0+0+0+1 or 'kXOzulhF'='

Additional Information:
-1" OR 2+194-194-1=0+0+0+1 --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:



Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:



Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
TO93cbNY

Additional Information:
-1 OR 2+824-824-1=0+0+0+1 --

Additional Information:
-1 OR 2+681-681-1=0+0+0+1

Additional Information:
-1' OR 2+805-805-1=0+0+0+1 --

Additional Information:
-1' OR 2+93-93-1=0+0+0+1 or 'MpFdFb3O'='

Additional Information:
-1" OR 2+275-275-1=0+0+0+1 --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:
-1); waitfor delay '0:0:7' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
0"XOR(if(now()=sysdate(),sleep(9),0))XOR"Z

Additional Information:
2k2XS4cL'; waitfor delay '0:0:15' --

Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:
g7NWXuig'); waitfor delay '0:0:15' --

Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:
XoN629J2')); waitfor delay '0:0:15' --

Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:
-5 OR 247=(SELECT 247 FROM PG_SLEEP(15))--

Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:
-5) OR 122=(SELECT 122 FROM PG_SLEEP(15))--

Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:
-1)) OR 455=(SELECT 455 FROM PG_SLEEP(15))--

Additional Information:
o1WPxXu4'; waitfor delay '0:0:15' --

Additional Information:
X3pq07N4' OR 218=(SELECT 218 FROM PG_SLEEP(15))--

Additional Information:
i2jhQp7d'); waitfor delay '0:0:15' --

Additional Information:
xMv7x4te') OR 71=(SELECT 71 FROM PG_SLEEP(15))--

Additional Information:
IbKvmZZx')); waitfor delay '0:0:15' --

Additional Information:
YkhmkP9W')) OR 826=(SELECT 826 FROM PG_SLEEP(15))--

Additional Information:
-5 OR 539=(SELECT 539 FROM PG_SLEEP(15))--

Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:
-5) OR 160=(SELECT 160 FROM PG_SLEEP(15))--

Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@EQr47

Additional Information:
-1)) OR 220=(SELECT 220 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
-1)) OR 266=(SELECT 266 FROM PG_SLEEP(9))--

Additional Information:



Additional Information:
-1)) OR 107=(SELECT 107 FROM PG_SLEEP(0))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
vL4vUHTG' OR 262=(SELECT 262 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
gGLXRSqE' OR 938=(SELECT 938 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
WT10Ii3x' OR 598=(SELECT 598 FROM PG_SLEEP(9))--

Additional Information:



Additional Information:
QUuBKFso') OR 152=(SELECT 152 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
nI56G5Pp')) OR 493=(SELECT 493 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:



Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@nxzWO

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
vJlQYk5k

Additional Information:
-1 OR 2+406-406-1=0+0+0+1 --

Additional Information:
-1 OR 2+236-236-1=0+0+0+1

Additional Information:
-1' OR 2+914-914-1=0+0+0+1 --

Additional Information:
-1' OR 2+282-282-1=0+0+0+1 or '9J7jHjSj'='

Additional Information:
-1" OR 2+210-210-1=0+0+0+1 --

Additional Information:



Additional Information:



Additional Information:
if(now()=sysdate(),sleep(15),0)

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(14),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
0"XOR(if(now()=sysdate(),sleep(0),0))XOR"Z

Additional Information:



Additional Information:



Additional Information:
(select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

Additional Information:



Additional Information:



Additional Information:
-1; waitfor delay '0:0:15' --

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
-1); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
-1)); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
1 waitfor delay '0:0:15' --

Additional Information:



Additional Information:
RO4xZyuD'; waitfor delay '0:0:15' --

Additional Information:



Additional Information:
n2HpQRHN'); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
hd4dcDEY')); waitfor delay '0:0:15' --

Additional Information:



Additional Information:
-5 OR 237=(SELECT 237 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
-5) OR 65=(SELECT 65 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
-1)) OR 486=(SELECT 486 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
-1)) OR 399=(SELECT 399 FROM PG_SLEEP(14))--

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:
x4ZvP74B' OR 337=(SELECT 337 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
0VRZpjOv') OR 601=(SELECT 601 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
DrCdekI1')) OR 16=(SELECT 16 FROM PG_SLEEP(15))--

Additional Information:



Additional Information:
MQqu0z64')) OR 87=(SELECT 87 FROM PG_SLEEP(7))--

Additional Information:



Additional Information:

*DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

Additional Information:



Additional Information:

'||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

Additional Information:
1'"

Additional Information:
1����%2527%2522

Additional Information:
@@HJ5oY

Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
HOW MANY STEPS PER INCH?

Influenza is the most frequent cause of death from a vaccine-preventable disease in the United States. From 1990 through 1999, an average of approximately 36,000 influenza-associated pulmonary and circulatory deaths occurred during each influenza season. In addition to fatalities, seasonal influenza is also responsible for more than 200,000 hospitalizations per year. Rates of infection from seasonal influenza are highest among children, but the risks for complications, hospitalizations, and deaths are higher among adults ages 65 and older, children younger than 5 years, and people of any age who have medical conditions that place them at increased risk for complications from influenza.

A novel H1N1 virus was first detected in March of 2009 and quickly spread to pandemic levels. In the U.S., it is estimated that approximately 43-89 million persons became ill with 2009 pandemic H1N1 from April 2009 to April 2010. The virus also resulted in significant hospitalizations and deaths among children, adults 19-65 years, obese persons, and pregnant and post-partum women.

Click the link to add information to this solution:
HOW SERIOUS THE FLU?

A CNC machine takes codes from a computer and converts the code using software into electrical signals. The signals from the computer are then used to control motors. Since the motors can turn very small amounts the machine is able to move in highly precise movements over and over again.

Additional Information:

Click the link to add information to this solution:
HOW DO CNC MACHINES WORK?

This video will illustrate how to test for laser power:

Click the link to add information to this solution:
HOW TO KNOW IF THE POWER SUPPLY OF THE LASER TUBE IS DAMAGED