[ Log In ]
[ Register ]

Question #: 14892

Question: [1.5 kW (kilowatt) Water Cooled Spindle with Inverter (VFD)] what power plug is used on the 220volt vfd?

Current Solution

You can use any 220 style plug on the 220 VFD. Make sure to use a plug that is for a single phase 220 AC.

Respond:

Other Possible Solutions to this Question

  • what is the current draw of the 220v VFD

    The current draw of the 220V VFD is 10 amps. Since the spindle is rated at 2.2kW, and the mains for the US 220V is in the range of 220V to 240V,

    2200W/220V = 10A
    2200W/240V = 9.167A

    So, the rage of current draw will be between 10A and 9A, but it is advisable to provide a buffer of about 5 more amps if possible.

    Click the link to add information to this solution:
    what is the current draw of the 220v VFD

  • What brand is the 2.2 kW spindle? Same for the VFD. Thanks.

    Spindles are generally covered up to 1 year after date of purchase. We do not repair them in house, but we do work with our manufacturer to replace defective units. Generally if you have a defective unit covered under warranty, we will issue a replacement.

    Click the link to add information to this solution:
    What brand is the 2.2 kW spindle? Same for the VFD. Thanks.

  • WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

    The motor cables for the blackToe are as follows:

    Total 30 feet

    X - 9
    Y - 10
    Z - 11

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    WHAT CABLE LENGTHS ARE USED FOR THE BLACKTOE

  • WHAT IS THE WARRANTY ON COMPLETE UNIT?

    We provide a one year warranty from the date the item is delivered.

    Click the link to add information to this solution:
    WHAT IS THE WARRANTY ON COMPLETE UNIT?

  • WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

    If you take the standard parallel cable BoB (Break Out Board), then you will need control software (Mach 3 or EMC2) and CAM software to make your G-Code (such as CamBam). Personally I use CamBam and Mach 3, they work beautifully but don't expect to turn them on and know how they work out of the box. Give yourself a few weeks to get familiar with the basics. CamBam is VERY powerful software for it's price. I'm surprised how much I keep learning on what I can do with it...I highly recommend it if you want as much control as possible.

    Mach 3 + CamBam as a bundle costs $310. EMC2 will give you a free replacement for Mach 3 and is exclusively for Linux.

    If you use the USB BoB, it will cost an extra $75 + $75 for the software. This is an all-in-one package so no need for Mach 3 or CamBam.

    For etching rasters (jpeg, bmp, tiff, non-vectors, photos), I highly recommend PicEngrave. It has been a labor of love for the past 9 years and John has done a wonderful job with it. It easily compares in quality compared to software that is in the $200-$300 range. John's software runs $40 and can be found here: http://picengrave.com/ (don't let the modest website fool you, this stuff can do amazing things). DotG and the Mach3 engrave plugin are two other options and instructions can be found on Dustans page in the gallery on buildyourcnc.com website.

    Click the link to add information to this solution:
    WHAT SOFTWARE CAN BE USED WITH THE BLACKTOOTH LASER CUTTER?

  • WHAT IS THE WARRANTY ON YOUR PRODUCTS

    We provide a one year warranty from the date the item is delivered.

    Click the link to add information to this solution:
    WHAT IS THE WARRANTY ON YOUR PRODUCTS

  • WHAT TERMINALS ARE USED TO CONNECT THE INVERTER WALL OUTLET?

    Input to VFD:
    240V Active - R
    240V Neutral - S
    Ground - E

    Additional Information:

    Click the link to add information to this solution:
    WHAT TERMINALS ARE USED TO CONNECT THE INVERTER WALL OUTLET?

  • WHAT LENGTH OF MOTOR CABLE SHOULD BE USED WTIH THE BLUECHICK V4.2

    The recommended total length of motor cable should be 15 feet for the blueChick v4.2

    Z - 6 feet
    Y - 5 feet
    X- 4 feet

    20 AWG 4 conductor

    If your drivers will be positioned farther from the machine, you may need longer cable.

    Additional Information:

    Click the link to add information to this solution:
    WHAT LENGTH OF MOTOR CABLE SHOULD BE USED WTIH THE BLUECHICK V4.2

  • What are the physical dimensions of the 2.2kw VFD?

    On Monday, when I get back into the office, I will provide the dimensions for the 2.2kW spindle and I will also provide a drawing of these dimensions on the spindle 2.2kW page. Thanks.

    Additional Information:
    Spindle dimensional specifications:

    - Overall diameter is 80mm
    - The length of the outer housing is 200 mm
    - Diameter of the extension just below the spindle is 36mm and the length is 12mm
    - The Collet shaft diameter is 11.318 and the collet nut diameter is 16.75mm and both extend from the extension approximately 52.5 mm
    - The overall length is 264.5mm not including the air ports and the electrical connector (outer housing 200mm + extension 12mm + collet shaft and nut 52.5 mm).
    - The air ports extend 20 mm from the top of the spindle

    Click the link to add information to this solution:
    What are the physical dimensions of the 2.2kw VFD?

  • DOES THE SPINDLE RUN ON A 50HZ POWER SOURCE?

    The spindle inverter (VFD) will run on a 220V (or between 170V-250V) power source with either 50Hz or 60Hz.

    Click the link to add information to this solution:
    DOES THE SPINDLE RUN ON A 50HZ POWER SOURCE?

  • what size circuit breaker should I use with the 2.2KW VFD?

    The 2.2kW spindle has a power rating of 2.2kW or 2200 watts.

    If the VFD AC voltage input is rated for 220 volts, then 2200 watts / 220 volts is 10 amps, so a 15 or 20 amp breaker will work.

    If the VFD AC voltage input is rated for 110 volts, then 2200 watts / 110 volts is 20 amps, so a 25 or 30 amp breaker will work.

    Click the link to add information to this solution:
    what size circuit breaker should I use with the 2.2KW VFD?

  • HOW TO KNOW IF THE POWER SUPPLY OF THE LASER TUBE IS DAMAGED

    This video will illustrate how to test for laser power:

    Click the link to add information to this solution:
    HOW TO KNOW IF THE POWER SUPPLY OF THE LASER TUBE IS DAMAGED

  • What size of wire do you use to connect the VFD to the spindle?

    The type of wire that should be used between the spindle and the VFD (Variable Frequency Driver also called the inverter) should be of stranded type and we use between 18 and 16 AWG.

    The total current is divided among the three coil wires, therefor a wire gauge of 16 should be sufficient.

    Currently we use 20AWG 4 conductor.

    Additional Information:

    Click the link to add information to this solution:
    What size of wire do you use to connect the VFD to the spindle?

  • WHAT IS THE DIFFERENCE BETWEEN MACH3 AND MACH4?

    Standard Version Features Mach3 Mach4 Hobby Mach4 Industrial
    Number of Planners 1 1 1
    Number of Axis 6 6 6
    Out of Band Axis (OBA) 0 1 6
    Slave axis (uses up coordinated axes) 3 N/A N/A
    Slave motors (does not use up coordinated axes) N/A 4 per Axis 4 per Axis
    API Interface - Open to All Hardware Yes Yes Yes
    Extended Plugin Support Yes Yes Yes
    User customizable GUI Yes Yes Yes
    Unified (GUI) Interface - PLC, CNC, etc.. Yes Yes
    Unlimited IO Yes Yes Yes
    Modbus PLC Yes Yes Yes
    PMC (Ladder Logic addressing for cnc/plc) Yes Yes
    Unlimited File Size Yes Yes
    Tool Path Display Yes Yes Yes
    Tool Path Speed & Quality Low High High
    Scripting - Customization Yes Yes Yes
    LUA Scripting - simple, fast, cross-platform Yes Yes
    - Lua sockets (ftp, http, smtp,..) Yes Yes
    - SSL (security layer) Yes Yes
    - LFS (manage large files and data storage) Yes Yes
    - Seriel port Yes Yes
    - Enraving of part numbers / serial numbering of parts Yes Yes
    - Plugin panel objects Yes Yes
    IPC Library for Data Sharing/tracking (Interprocess communication) Yes Yes
    Full Feature Screens/Controls Per Machine Type Yes Yes
    Currently Availabe: Mill, Router, Lathe, 3d Printer Yes Yes
    Multiple gcode Interpruters (Per Machine Type) Yes Yes
    Probing - Intergrated in standard screens Yes Yes
    Simulated 3d Machining (with additional plugin license) Yes Yes
    Tool Life Management (G10 L3 command) Yes
    Screw Mapping Yes
    Professional Screen Designer (advanced G.U.I.) Yes
    - Screen Animation Control Yes
    - Screen Integrated Tool Table Control Yes
    - Screen Integrated Work Offset Control Yes
    - Screen Integrated gcode editor Yes
    - Screen Artsoft Wizard Package Integration Yes
    Macro B gcode Programming (#variables) Yes
    - User definable gcodes via marco calls Yes
    - Macro Calls: G65, G66, G66.1 Yes
    - gcode via marco call (custom G codes via macro B) Yes
    - mcode via macro call (custom M codes via macro B) Yes
    - mcode via sub code (custom M code via sup program) Yes
    - Conditional gcodes Yes
    - set VN call - define variable names Yes
    gcode Editor Included Yes
    Scripted M code (custom M code via LUA script) Yes Yes
    Variable Speed Spindle Yes Yes Yes
    Spindle Relay Yes Yes Yes
    Coolant relay Yes Yes Yes
    Mist Relay Yes Yes Yes
    Threading Yes Yes Yes
    Rigid Tapping Yes Yes Yes
    Single Block Yes Yes Yes
    Block Delete Yes Yes Yes
    Optional Stop Yes Yes Yes
    MACH CNC CONTROL SOFTWARE MAIN FEATURES AND VERSION DIFFERENCES
    Standard Version Features Mach3 Mach4 Hobby Mach4 Industrial
    MACH CNC CONTROL SOFTWARE MAIN FEATURES AND VERSION DIFFERENCES
    Cutter Comp Yes Yes Yes
    Fanuc Type C Cutter Comp Yes Yes
    Fixture Offsets Yes Yes Yes
    G51 Scaling Yes Yes Yes
    G92 Offsets Yes Yes Yes
    G52 Offsets Yes Yes Yes
    Event Driven Yes Yes
    Multi Line MDI Yes Yes
    Subs In MDI Yes Yes
    OpenGL Optimization Yes Yes
    Multi-platform OS Compatibility Option Yes Yes
    Online Support Yes Yes Yes
    Phone Support Option Available Yes
    Support Priority Yes
    Available to End Users as "Do-it-yourself" Yes Yes
    Summary - Mach3 versus Mach4 :
    Mach4 Hobby is the closest comparable version to Mach3, yet it is still much more advanced. The price point of these versions is nearly
    identical. Mach3 is very popular for hobby enthusiest and is used in highly modified form by some great OEM's. In general, Mach4 is more
    complex than Mach3 and follows cnc industry standards. Mach3 has many customizations to make it easier for hobby users, but can lead to
    difficulties if users plan to apply their knowledge to more advanced systems. Mach4 is built as a full featured cnc controller capable of high
    speed machining for servo and stepper systems. Mach3's feature set is complete, while Mach4's will continue to expand. If you are new to cnc,
    Artsoft highly recommends using and learning Mach4 even if it appears that Mach3's feature set will be adequate for your needs.

    Click the link to add information to this solution:
    WHAT IS THE DIFFERENCE BETWEEN MACH3 AND MACH4?

  • WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

    Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

    Our machines are as follows (in order by size, larger at top):

    The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
    https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

    The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
    4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
    5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
    6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

    The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
    This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
    https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

    The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
    https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

    The 4'x8' blackFoot CNC Router:
    This machine requires a table to be built by the customer.
    https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

    The 2'x4' blackToe CNC router fully assembled complete with table:
    https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

    The blueChick CNC Router fully assembled completel with table:
    https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

    Click the link to add information to this solution:
    WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

  • WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

    Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

    Our machines are as follows (in order by size, larger at top):

    The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
    https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

    The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
    4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
    5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
    6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

    The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
    This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
    https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

    The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
    https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

    The 4'x8' blackFoot CNC Router:
    This machine requires a table to be built by the customer.
    https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

    The 2'x4' blackToe CNC router fully assembled complete with table:
    https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

    The blueChick CNC Router fully assembled completel with table:
    https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

    Click the link to add information to this solution:
    WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

  • WHAT IS THE SHIPPING COST OF MACHINE TO AUSTRALIA?

    You can determine if the country is serviceable by:
    - selecting the items you want to purchase on the website
    - go to the cart (shopping cart top left of any webpage)
    - log in, or register
    - Enter the address and click on calculate shipping.

    The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address.

    The shipping times are determined by the service you select in the shopping cart. If a machine is purchased, we generally have a one week lead time unless otherwise stated in the description of the machine's product page.

    Additional Information:

    Click the link to add information to this solution:
    WHAT IS THE SHIPPING COST OF MACHINE TO AUSTRALIA?

  • HOW MUCH MDF IS USED FOR THE BOOK MACHINE COMBO #1

    Three 24" x 48" sheets of mdf is used for the book build or the combo #1 plans and kit.

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:
    nt9ZbSRf

    Additional Information:
    -1 OR 2+534-534-1=0+0+0+1 --

    Additional Information:
    -1 OR 2+83-83-1=0+0+0+1

    Additional Information:
    -1' OR 2+658-658-1=0+0+0+1 --

    Additional Information:
    -1' OR 2+552-552-1=0+0+0+1 or '8QfEjrbS'='

    Additional Information:
    -1" OR 2+524-524-1=0+0+0+1 --

    Additional Information:
    if(now()=sysdate(),sleep(15),0)

    Additional Information:
    0'XOR(if(now()=sysdate(),sleep(15),0))XOR'Z

    Additional Information:
    0"XOR(if(now()=sysdate(),sleep(15),0))XOR"Z

    Additional Information:
    (select(0)from(select(sleep(15)))v)/*'+(select(0)from(select(sleep(15)))v)+'"+(select(0)from(select(sleep(15)))v)+"*/

    Additional Information:
    -1; waitfor delay '0:0:15' --

    Additional Information:
    -1); waitfor delay '0:0:15' --

    Additional Information:
    -1)); waitfor delay '0:0:15' --

    Additional Information:
    1 waitfor delay '0:0:15' --

    Additional Information:
    MXjE3Md3'; waitfor delay '0:0:15' --

    Additional Information:
    gont9Py6'); waitfor delay '0:0:15' --

    Additional Information:
    ixm7ZgaG'); waitfor delay '0:0:15' --

    Additional Information:
    L3WX2lOf')); waitfor delay '0:0:15' --

    Additional Information:
    -5 OR 669=(SELECT 669 FROM PG_SLEEP(15))--

    Additional Information:
    -5) OR 526=(SELECT 526 FROM PG_SLEEP(15))--

    Additional Information:
    -1)) OR 99=(SELECT 99 FROM PG_SLEEP(15))--

    Additional Information:
    B3hszLzc' OR 556=(SELECT 556 FROM PG_SLEEP(15))--

    Additional Information:
    K9OJrDz1') OR 613=(SELECT 613 FROM PG_SLEEP(15))--

    Additional Information:
    73wbJn3w')) OR 247=(SELECT 247 FROM PG_SLEEP(15))--

    Additional Information:

    *DBMS_PIPE.RECEIVE_MESSAGE(CHR(99)||CHR(99)||CHR(99),15)

    Additional Information:

    '||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

    Additional Information:

    '||DBMS_PIPE.RECEIVE_MESSAGE(CHR(98)||CHR(98)||CHR(98),15)||'

    Additional Information:
    1'"

    Additional Information:
    1����%2527%2522

    Additional Information:
    @@zROBD

    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:



    Additional Information:

    Click the link to add information to this solution:
    HOW MUCH MDF IS USED FOR THE BOOK MACHINE COMBO #1

  • WHAT IS INCLUDED IN THE BLACK TOE TO FOOT UPGRADE?

    The gantry sides, gantry bridge parts, two 1/2" rods, two 1/2" ID bearings, two 1/2" ID 12 tooth sprockets, and extra roller chain.

    Click the link to add information to this solution:
    WHAT IS INCLUDED IN THE BLACK TOE TO FOOT UPGRADE?

Get Help with:
This Product
Orders
Tech Support
Sales
This Product
Order Query
Tech Support
Sales
Not logged in. Log In Register
Track Order(s)
View Order(s)
I Want to Schecule a One-On-One Paid Tech Support Session
Book an Appointment Pertaining to a BuildYourCNC Product (Free)
Ask a Quesion Below (Free):
Book an Appointment Pertaining Other Equipment ($60/half hour)
Book an Immedite Appointment Pertaining Other Equipment ($120/half hour)
Ask a Quesion Below (Free):
Waiting for response... I may not answer immediately, but I was notified on my cellular phone so my response is forthcoming. If I don't respond immediately, you can always go to the [My Account] page to see all of our chats at any time.