These machines are inherently dangerous. Before the machine moves, the machine should be clear of any person by a dimension of at the distance of a persons reach plus a few more feet. This is the policies we institute in our shop and what is recommend to all of our customers. Treat these machines as you would treat any major power tool in the shop.

With that said, you can certainly add some protective parts, but still keep folks away even with those installed. I would use the gantry side to do all of the mounting of the protective parts. Consider using sheet metal that you can bend and make a simple installation right on the gantry side.

Additional Information:



Additional Information:

Click the link to add information to this solution:
THESE MACHINES ARE DANGEROUS, WHAT DO DO?

The plasma nozzle must be close to the cutting area and you will need some way to keep the nozzle at the right level with some type of device. The spray is downward, so you will need a contained area with a sheet of water at the bottom to extinguish he spray. You should have no problem using our machines for this application since you would need to product the table bed.

Click the link to add information to this solution:
CAN YOUR PRODUCTS OF MACHINES BE USED TO CREATE PLASMA TABLE?

The machines have minimal to no backlash depending on how you apply the machine. Since the cnc machines use roller chain on the x and y axes, and the roller chain is tensioned, the backlash is nearly eliminated. I say nearly because the if you control the machine in a way that there will be excessive load on the end mill, then the machine could have a tendency to spring to one side or the other because of the length of tensioned roller chain. The movement is minor and can be eliminated with the proper control of the machine.

Click the link to add information to this solution:
I'M CURIOUS IF THESE SYSTEMS WILL ENGRAVE LETTERING ACCURATELY WITHOUT BACKLASH?

There is virtually no limit to what a CNC can do. CNC machines are responsible for almost all modern day machining operations in manufacturing industries. They normally costs tens of thousands of dollars, or hundreds of thousands of dollars. Our machines can be used to engrave plaques, cut wood for kits, mill aluminum parts, and inject plastic components. All it requires is willing to learn and understand how to use the machines to accomplish what you want to do.

Additional Information:
Curved Trophy

Additional Information:

Click the link to add information to this solution:
WHAT CAN CNC MACHINES DO?

Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

Our machines are as follows (in order by size, larger at top):

The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

The 4'x8' blackFoot CNC Router:
This machine requires a table to be built by the customer.
https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

The 2'x4' blackToe CNC router fully assembled complete with table:
https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

The blueChick CNC Router fully assembled completel with table:
https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

Click the link to add information to this solution:
WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

Yes, we have fully assembled machines that come complete with the spindle (and laser if needed) with sizes ranging from 1'x2' all the way up to 6'x12' or longer. We can also make custom fully assembled machines with other sizes. All of these machines are perfect for very intricate detailed work including but definitely not limited to sign making, bas relief, cabinetry, architectural model making, engraving, machine parts, automotive, custom sound enclosures (automotive or other), and other scientific application which we have delivered machine for many types of these applications.

Our machines are as follows (in order by size, larger at top):

The Fabricator Pro (although stated on the website at 4'x8') can be provided up to a 6'x12' (or longer) size. Call us for the price above the 4'x8' size.
https://www.buildyourcnc.com/item/cnc-machine-fabricator-pro-milling

The greenBull 4x, 5x or 6x CNC Machine is available fully assembled; however, you are responsible for building the table on this machine, but the price is considerably lower. The 4x, 5x, and 6x is a width specification and the length is determined by your table length.
4x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-4X-milling-hybrid
5x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-5X-milling-hybrid
6x: https://www.buildyourcnc.com/item/cnc-machine-greenBull-v4-6X-milling-hybrid

The 4'x8' greenLean CNC Router (Table bed is vertically oriented with a slant) fully assembled:
This machine is fully assembled with the overall frame. The customer would need to fasten the frame to the wall and affix a spoilboard to the bed.
https://www.buildyourcnc.com/item/cnc-machine-greenLean-v1-milling

The 4'x8' Vertical Laser XL Laser Cutter and Engraver fully assembled:
https://www.buildyourcnc.com/item/cnc-machine-vertical-laser-xl-laser-cutter

The 4'x8' blackFoot CNC Router:
This machine requires a table to be built by the customer.
https://www.buildyourcnc.com/item/cnc-machine-blackFoot-v4-milling

The 2'x4' blackToe CNC router fully assembled complete with table:
https://www.buildyourcnc.com/item/cnc-machine-blacktoe-v4-2x4-milling

The blueChick CNC Router fully assembled completel with table:
https://www.buildyourcnc.com/item/cnc-machine-bluechick-v4-milling

Click the link to add information to this solution:
WHAT IS THE PRICE OF ASSEMBLED MACHINES COMPLETE?

Yes, the CNC machine hardware and plans combo is the same machine as in the book. The machine that we provide the plans for, can be found on the website, here http://buildyourcnc.com/Item/cnc-machine-scratchbuild

Additional Information:



Additional Information:

Click the link to add information to this solution:
WHAT MACHINES DO WE SELL PLANS FOR

A CNC machine takes codes from a computer and converts the code using software into electrical signals. The signals from the computer are then used to control motors. Since the motors can turn very small amounts the machine is able to move in highly precise movements over and over again.

Additional Information:

Click the link to add information to this solution:
HOW DO CNC MACHINES WORK?

Yes, we have the optional table for the blackToe, but we need to fabricate it, which only takes one day. We generally reserve one week for the total fabrication and packing of all parts.

Click the link to add information to this solution:
DO YOU HAVE BLACKTOE MACHINES WITH TABLES READY TO GO OR HOW LONG DOES IT TAKE MAKE ONE?

Tinnitus . Learn to love it. No really you should see a doctor. Make sure. White noise will help you sleep when it gets loud.

Additional Information:
I learned, too late, that if a sudden loud event causes tinnitus, see an audiologist IMMEDIATELY. They can do something about it if addressed within a day or so.

Wear hearing protection...always. Loud noises trigger my tinnitus, and headphones and ear plugs (when out & about or at the movies, subway, etc) help tremendously. Mine are rated 33dB.

Click the link to add information to this solution:
WHAT CAUSES RINGING IN YOUR EAR AND HOW CAN YOU STOP IT?

In the customer service live, just enter "motor tuning" and it will give you a list of all the recommended or default settings for our machines. However the acceleration and velocity for the greenBull(other machines) will be an actual determination on your trials. You will want the highest possible acceleration and velocity without the motors stalling, so you can do increments of ten to be on the safe side, if it is too slow try increments of 25.

The steps per inch is dependent on the microstepping:
Steps/Inch for the x and y
Steps = 200 motor steps per revolution x 16 microsteps = 3200 steps
Inches = sprocket number of teeth x pitch of the sprocket = 14 x .25" = 3.5 inches
steps/inch = 3200 / 3.5 = 914.28
This is really a starting point. You will then need to use the mach3 calibration function to get the perfect steps/inch value. Use as long a measurement as possible when calibrating.

Velocity:
Start with a value of 1000 ipm. Increase this value with a relatively low acceleration at about 10. You will notice at a particular velocity that it will stall. This is your stall velocity. I would take the stall velocity and reduce it by about 30% to 50% which should give you a good final safe velocity.

Acceleration:
Once the velocity is found, raise the acceleration until it start to stall at a low velocity. Reduce the acceleration by about the same percentage to stick with a safe acceleration.

The acceleration is mostly dependent on torque (current) and the top speed is dependent on the amount of voltage.

Give some tests with all of the axes running at the same time. If you notice and stalling, reduce velocities and acceleration depending on when the stall happens (top end, or acceleration curve).


X-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110 (“0”=down, “1”=up)
Mach3 Motor Tuning: 914.29 steps/in
Y-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/16 Microstep
Dipswitches: 01100110
Mach3 Motor Tuning: 914.29 steps/in
Z-axis
“CW8060 (6.0A) Driver”
Set to 5.43A, 1/4 Microstep
Dipswitches: 01100100
Mach3 Motor Tuning: 1600 steps/in

Additional Information:


Additional Information:


Additional Information:
4th axis


Additional Information:


Additional Information:


Additional Information:

Click the link to add information to this solution:
HOW CAN I DETERMINE STEPS/INCH, VELOCITY AND ACCELERATION?

Information regarding influenza surveillance is available October through May from the CDC influenza website at www.cdc.gov/flu/weekly/fluactivity.htm.

In addition, periodic updates about influenza are published in the MMWR. State and local health departments should be consulted regarding availability of influenza vaccine, access to vaccination programs, information about state or local influenza activity, and for reporting influenza outbreaks and receiving advice regarding their control.

Click the link to add information to this solution:
WHERE CAN I GET INFORMATION ON INFLUENZA (THE FLU) AND ITS SURVEILLANCE?

If you are located near Houston, Texas area you can stop by our shop. If you are not near us, you can check in our forums, and see if you can find someone in your area that has one of our machines, and would be willing to let you come see it in action.

Click the link to add information to this solution:
I WOULD LIKE TO KNOW IF THERE IS A STORE OR SHOP WHERE CAN SEE THE PRODUCT AND BUY IT?

To get the activation code, all you need to do is plug the USB board into the computer using a USB cable, go to machine -> firmware -> update. After the firmware is updated the program will present to you a dialog box containing the activation code.

Additional Information:
MUAR-QVXU-CAYW-CBWQ


Additional Information:
MUIS-RQPB-PTHB-QTTB

Additional Information:
MUIH-EERP-IADB-TRIP

Additional Information:
9zYWBVf5TxKSK7hEr8gFX3EBw5wa0AMMllQqgftIAnKvZ8DXItLxaPbOB3jWvnpczl/sM/De0scRPHfSxWGmcA==

Additional Information:
Key: LUQR-BQYI-SCEW-QVBT

Additional Information:


Additional Information:
after i copy the code in the lower case i recived the same message (more than 8 times) ,, this is a evaluation...,, what i need to do to register properly?

Additional Information:
MUJR-BISM-KRDN-KKER
056971

Additional Information:
0561234

Additional Information:
MURL-QPQU-EGBJ-FNMB

Additional Information:
MUCE-LFMQ-WBCW-MLHO

Additional Information:


Additional Information:
LUTA-ADVJ-FXTW-FBCE

Additional Information:
LUTA-ADVJ-FXTW-FBCE

Additional Information:
looking for registration key for MUUK-IBTW-ECTL-CJWD

Additional Information:
MUXO-PIYY-KNHD-RKLY

Additional Information:
MUUE-YYCR-FCIC-VATK

Additional Information:
MUUE-YYCR-FCIC-VATK

Additional Information:


Additional Information:
MUEY-YLJU-OBRR-LJBV

Additional Information:
MUSP-JFDV-EKGQ-OVLW

Additional Information:
MUSP-JFDV-EKGQ-OVLW

Additional Information:


Additional Information:


Additional Information:
MULY-XRYF-BBDN-FBWP

Additional Information:


Additional Information:


Additional Information:
how to generate activation code richauto a11

Additional Information:
MUJC-LNIL-EOHS-YKNQ

Additional Information:
sdfd

Additional Information:
m l

Additional Information:
MUXC-RWKB-PKAL-HGNN

Click the link to add information to this solution:
THEY ARE ASKING FOR THE ACTIVATION CODE AND SERIAL NUMBER USB BOARD. HOW CAN GET THAT INFORMATION?

You can expect a one week lead time for our machines.

Additional Information:



Additional Information:



Additional Information:



Additional Information:

Click the link to add information to this solution:
WHAT LEAD TIME CAN EXPECT FOR THE BLACKTOE MACHINE?

If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
https://www.buildyourcnc.com/Item/milling

Click the link to add information to this solution:
I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
https://www.buildyourcnc.com/Item/milling

Click the link to add information to this solution:
I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

If you purchased a machine that was used and you don't know which mode it is, you can browse our models here:
https://www.buildyourcnc.com/Item/milling

Click the link to add information to this solution:
I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC

Hi, can you explain which 2.00 product? Thanks.

Click the link to add information to this solution:
I BOUGHT A 2.0 AND NEED HELP PUTING IT TOGATHER ELC