hello i need to make a order , this my 1st time ordering.

Question #: 1176

Question: hello i need to make a order , this my 1st time ordering.

Current Solution

If you would like to make an order, simply add the item you wish to purchase to your cart. Then click on "Your cart" either in the box or at the top of the page. Enter your shipping and billing information and then select method of payment. Once you enter your payment info you should get a confirmation and a Transaction ID number.

Respond:

Other Possible Solutions to this Question

Hi ,can't place an order because ups do not find my address this is not the first Time i am ordering ,user; Claudal, thanks
My integration with USPS is not working at the moment and I have needed to resort to using only UPS and FedEX. I am working on a solution. Many thanks for the patience, Patrick
Click the link to add information to this solution:
Hi ,can't place an order because ups do not find my address this is not the first Time i am ordering ,user; Claudal, thanks
[410] what I need to buy to make this work on my GreenBull machine and the redfly?
Since this 4th axis already comes with a stepper motor, you will need a driver and some cable to connect to the driver from where the 4th axis will be placed. If you have extra space in the redFly electronics enclosure, you can fasten the driver there. You will also need some wire to connect the driver to the breakout baord.
Click the link to add information to this solution:
[410] what I need to buy to make this work on my GreenBull machine and the redfly?
I thought I was ordering a part. I did not want any schematic or plans. Can you cancel my order?
Please keep my order in place. I have found that it is a physical part not a plan. So do not cancel the order. Thank you

Additional Information:
Please keep my order in place. I have found that it is a physical part not a plan. So do not cancel the order. Thank you
Click the link to add information to this solution:
I thought I was ordering a part. I did not want any schematic or plans. Can you cancel my order?
I need to change my address before I order parts.
The shipping address is taken during the checkout process in the cart. If you have already placed an order, but need to change the address, please give us a call at the number at the top right of the webpage.
Click the link to add information to this solution:
I need to change my address before I order parts.
I have an Eagle Plasma table and I want to add a 40 laser. Can you supply me a list of what I need to make this happen.
If you would like to add a laser to a plasma table, you will need the following parts:

Laser tube at 40 watts:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Tube-CO2-40Watt

Mirror mounts (this will depend on the way you mount the laser tube):
https://www.buildyourcnc.com/item/Laser-Component-Mirror-Mount-20mm

Mirrors for the mirror mounts:
https://www.buildyourcnc.com/Item/Laser-component-20mm-mirror-25mm

Laser Tube Power Supply:
https://www.buildyourcnc.com/item/Laser-Component-Power-Supply-CO2-40W

Laser Focus Lens:
https://www.buildyourcnc.com/item/laser-component-20mm-lens-2-inch-50!80mm

Mirror and Lens Mount and Nozzle:
https://www.buildyourcnc.com/item/Laser-Component-Nozzle-20mm-lens-mirror

High Tension Extension Cable:
https://www.buildyourcnc.com/item/Laser-component-Power-Supply-High-Tension-extension-wire

Laser Control System:
https://www.buildyourcnc.com/item/Laser-Component-Laser-Control-System

Screw Posts (to connect the high tension and return wire to the laser tube, highly recommended as the leads on the laser tube are fragile):
https://www.buildyourcnc.com/item/laser-component-newbiehack-connectors-screw-terminal-binding-post

Safety Eyewear for CO2 laser wavelength:
https://www.buildyourcnc.com/item/laser-components-goggles-safety-tinted
Click the link to add information to this solution:
I have an Eagle Plasma table and I want to add a 40 laser. Can you supply me a list of what I need to make this happen.
Hello! i want to change my existent faulty plasma control to a match control, can you suggest something for this?
In regards to your current electronics, one of our electronics combo will work perfect in your application. Depending on size of your machine, 1 out of 3 of our combos will work!(modification may be needed and may vary) However, if you are currently thinking about salvaging some items, it might complicate the swap. These are the things that may complicate the swap:
First: If your current plasma is running off of servos, none of our controllers will work in your application, hence you will need to replace all your electronics.
Second: If you have stepper motors, our interface boards will work with your motors! Only thing is to get it to work hand in hand with your current drivers!
Third: If stepper motors are what you have! You might only need a few items to get your machine back up and running
Fourth: Our current parallel interface board, will work with Mach 3! Which has a plasma control software implemented with it.

Please email customerservice@buildyourcnc.com for further assistance!
Click the link to add information to this solution:
Hello! i want to change my existent faulty plasma control to a match control, can you suggest something for this?
I need to place an order by school purchase order
BuildYourCNC accepts purchase orders by email for most educational systems. Please email your purchase order to customerservice@buildyourcnc.com. Please be sure to include itemized descriptions of everything you need to order, and use the website to calculate appropriate shipping costs. Please also indicate if you are tax-exempt and include the shipping address for where the goods will be delivered. Standard terms are NET 30, so you will need to settle all pending invoices within 30 days of receipt of goods.
Click the link to add information to this solution:
I need to place an order by school purchase order
Hello I just want to ask, is this machines can milling Aluminum?
Our machines can mill aluminum, we have only tested with thin aluminum sheets. But milling aluminum is no problem with our machines, here is a video we recently did with our gB 4'x8' the aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting
Click the link to add information to this solution:
Hello I just want to ask, is this machines can milling Aluminum?
[365] I had ordered 3 and they appear to be left handed threads. I did not see a specification when ordering. Is this mentioned somewhere?
These antibacklash nuts are right-handed acme threads with 5 starts.
Click the link to add information to this solution:
[365] I had ordered 3 and they appear to be left handed threads. I did not see a specification when ordering. Is this mentioned somewhere?
I need a copy of an invoice. Can you tell me how to find a printable version of a recent order?
Invoices are generally attached to order confirmation emails. If you did not receive an order confirmation with an invoice attached, please contact us by phone 281-815-7701 or email customerservice@buildyourcnc.com and we will provide a copy of the invoice for you.
Click the link to add information to this solution:
I need a copy of an invoice. Can you tell me how to find a printable version of a recent order?
If I order 19ft of the 1/2" lead screw will it come in three 6'5" lengths by default? This is what I need. Thanks
No they will not come in that length as a default, we would contact the buyer to ask specific lengths due to the total length purchased.

However if you order the 1/2" lead screw we can get them cut to the specific length you require, by contacting us here or call us at 281-815-7701.
Click the link to add information to this solution:
If I order 19ft of the 1/2" lead screw will it come in three 6'5" lengths by default? This is what I need. Thanks
[807] What size power supply do I need to this?
I would recommend either a 36VDC or a 48VDC power supply with 10 amps. Here are links to these power supplied on this website:

https://buildyourcnc.com/item/electronicsAndMotors-power-supply-24v-36v-48v
Click the link to add information to this solution:
[807] What size power supply do I need to this?
Mach3 USB Interface Board, My switch inputs are def wired active-LOW but I need to set them as active-HI (red x) in ports & pins to make them work correctly, why would this be?
The inputs on the Mach3 USB board require that you complete the circuit with the V-, so that means that the inputs will fire on a high signal, hence the "Active High". That is simply how the Mach3 USB board is designed. The inputs, output and spindle connections on that side of the board require the V+ and V- to be connected to a 24V supply (most spindle VFDs have an available 24V output terminal for this use).

Additional Information:
Touch plate signal works and script is loaded but no touch plate function
Click the link to add information to this solution:
Mach3 USB Interface Board, My switch inputs are def wired active-LOW but I need to set them as active-HI (red x) in ports & pins to make them work correctly, why would this be?
I was wanting a 80w laser can that be an option when ordering?
We are offering this very soon!

Additional Information:
I am in the market to purchase a laser machine in the next 4 - 8 weeks. will there be an option by then. It is a deciding factor for me.
Click the link to add information to this solution:
I was wanting a 80w laser can that be an option when ordering?
Hello , Do you have an option to use our FedEx account on overnight service to ship our order to B.C. Canada ?
Yes, We can overnight packages to Canada using a customer's FedEx account number.
Click the link to add information to this solution:
Hello , Do you have an option to use our FedEx account on overnight service to ship our order to B.C. Canada ?
I need to buy a bottle laser 80w but the page does not i calculates the delivery to San Juan PR via UPS. I need to know immediately in order to be able to make the purchase immediately.
I believe the country of Puerto Rico may need to be US instead. I will change the cart's country field tonight so that it reflects the correct value.

Additional Information:
I see that you used US and may have worked for the US postal department but I also noticed there is an exception for UPS. I will do further research and fix this issue for PR customers! Many thanks for your patience and persistence.

Additional Information:
I just completed some fixes to the cart that corrects the Puerto Rico address for USP and USPS. It appears that USPS and USP require differences in the way the country is designated.

Thank you for bringing this to our attention and please let us know if you are experiencing any further issues.
Click the link to add information to this solution:
I need to buy a bottle laser 80w but the page does not i calculates the delivery to San Juan PR via UPS. I need to know immediately in order to be able to make the purchase immediately.
[575] Hello. Does this USB interface board thc? I have the proma 150.
I do not recommend using the Mach3 USB controller to be used with a torch height controller. There are only 4 inputs on the Mach3 USB controller. We have tried to interface a Proma THC to this board without success; however, we did not exhaust all possibilities.

I would recommend the Pokeys57CNC controller to connect the Proma THC as I have interfaced these two before and they work well together.
https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board
Click the link to add information to this solution:
[575] Hello. Does this USB interface board thc? I have the proma 150.
if buy a 3 axis cnc combo, which software would I need for working this combo?
if you purchased the USB interface, you will need planet-cnc software rather than Mach3, and you will need a usb cable to connect the usb interface to the computer.

The blackToe 2x4 CNC Machine Kit with optional table will need wire to connect the electronics. Don't forget to get some end mills to use for cutting the intended material.

Additional Information:

Additional Information:

Additional Information:
Click the link to add information to this solution:
if buy a 3 axis cnc combo, which software would I need for working this combo?
I would like to add laser option to my cnc mill. Is this possible?
It will be very soon. We are developing a mount for a 40W laser tube for the blackToe, blackFoot and greenBull. This will be available within 2 months.
Click the link to add information to this solution:
I would like to add laser option to my cnc mill. Is this possible?