BuildYourCNC - 1/2" to 1/4" - Rigid Coupling (Plastic/Delrin)

1/2" to 1/4" - Rigid Coupling (Plastic/Delrin)

Price Options Your Cart

1/2" to 1/4" Delrin Rigid Coupling

$22.95 SOLD OUT

Introduction:

With this coupling, the motor shaft with a 1/2" diameter will be inserted in one end, and a shaft, or lead screw also measuring 1/4" in diameter, or vice versa, will be inserted into the other end.

Description:

1/2" to 1/4" - Rigid Coupling (Plastic/Delrin)

Ask a question about the 1/2" to 1/4" - Rigid Coupling (Plastic/Delrin):

Previously answered questions:

Click on the question to reveal the answer.

[1/2" to 1/4" - Rigid Coupling (Plastic/Delrin)] when will this item be available

The rigid aluminum 1/2" to 1/4" couplings sold here work better to couple a 1/2" shaft or lead screw to a 1/4" shaft. I would suggest using that coupling rather than the Delrin version. Here is a link to the aluminum rigid coupling:
https://buildyourcnc.com/item/coupling-rigid-aluminum-!25-!5
Click the link to add information to this solution:
[40] when will this item be available

----

Related Tutorials

Step 21: Driver Caps, Resistor Networks and Mosfets
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. The resistors are in, right? Ah, I know, you want to see the complete assembly before you dig in. Ok, on to this part of the assembly. Please don't ask me what Mosfets are, but the word sound cool! I can tell you that they stand for Metal Oxide Semiconductor Field Effect Transistor. I have personally read about fifty descriptions of this electronic animal and I still can't figure it out. It doesn't say much for a Berkeley grad! Well, I'm open to some plain English interpretations without the word "drain" in them. Are you still with me?

DIY Coupling: A coupler for the motor and lead screw (from Marc K.)
This creative coupling solution comes from another generous user of the site. He has devised a way to couple the motor to the leadscrew with standard aluminum tubing. Marc has graciously allowed me to show you this creative idea.

Step 20: Stepper Driver Part 1 - Resistors
This tutorial is dated, if you are considering a CNC for your personal use, we would highly recommend purchasing a kit that is very stable from our wide range of machines available. Well... here we are, finally getting started with the electronics portion of the video series. The entire structure of the CNC machine is complete with the exception of the router mount. We will get to that a little later. For now, we will start on the assembly of the HobbyCNC 3 axis chopper unipolar stepper driver.